You can't service the lower ball joints by themselves. You must replace the entire lower control arm.
lmc truck (www.lmctruck.com). there is a diagram for upper and lower ball joints for the front end.
Typically the squeaks in the front end mean you need to replace the ball joints. I recommend doing both upper and lower ball joints at the same time.
The CV joints on a 1995 Ford Taurus can be replaced by removing the front tires, and the nuts on the lower ball joint. Next, the lower ball joint will need to be removed and the CV joint can be removed.
Replace upper and lower ball joints. Not hard, but time consuming.
To replace ball joints on a 2004 2WD Ranger, lift the upper control arm of the spindle assembly and remove the nut holding the lower ball joint in place. Then lower the lower control arm to relieve the ball joints. Replace with new.Ê
Raise the car up and check out the lower ball joints. You can grab the upper arm and if it rocks you need to replace the lower ball joints. Also look at the outer tie rods and suspension components
jack up the car front end removed the tires remove the lower control arm
Replace the front upper and lower ball joints.
Http://www.autozone.com go here on the right side there is link called repair info... go there... click on your year and model the click on drivetrain, then front suspension, then balljoints it will give you a detailed view along with pictures... hope this helps
how to replace lower ball joints on 1995 4 wheel drive Nissan truck
You can replace just the ball joints on the lower control arms , but the upper ball joints come with a new control arm
If you need to replace the lower ball joints, check your owners manual for instructions. The manual should show you the location and how to complete the repair.
Change lower ball joints on a 96 gmC 4 by 4
on the upper ball joints just remove the four bolts on the upper control arm and use a picker fork to remove the balljoint from the steering knuckle. for the lower ball joints you have to remove the axle then repeat the same steps for the uppers
which one? U-joints, Upper/Lower joints, Shaft joint. etc? have u ever change a joint, or replace any major parts, or work on vehicles? if not take it to repair shop. its too risky for an inexperience to work on vehicle. lost of life or limb can happen, lose your eye sight, hearing, etc.....
wear is it aat
which ones? upper or lower?
THE BALL JOINT IS PART OF THE LOWER CONTROL ARM
I have the same problem and the consensus is that it is the lower ball joints. Try to get grease into the lower ball joint (with a pointed applicator) or replace them.
need to replace my front lower running / blinker bulb how do i do it
first you take it in then pay them to do them for you!!!!!!!!!!
how do u replace the lower ball joint on a 1997 ford mustang
Ball joints.....One upper and one lower at each front wheel. For a total of 4.