Want this question answered?
Be notified when an answer is posted
metal pan is the oil pan on 2003 Volkswagen Passat.
To replace the oil pan gasket on a 2001 Volkswagen Passat turbo the exhaust downpipe must be removed. The oil needs to be drained and all the pan bolts need to be removed as well. When replacing the gasket a sealer should be used to ensure a proper seal.
The 2002 maxima has a problem with the oil pan rusting out. Replace the oil pan and gasket and it should be good to go
Is it required to remove the engine to replace the oil pan gasket on a 2002 cadillac eldorado/
Replacing the oil pan gasket is a fairly simple process. The labor allotment for replacement is 3/4 hour plus parts. Removing the oil pan requires a full oil change by necessity as well.
about 10 million dollars
you need to drop the transmisison oil pan,
First get under the vehicle, identify your oil pan and transmission pan. Your oil pan is typically deaper than the pan on the transmission. I don't know the specific number of bolts that surround it but take those out after you've drained it using the bolt located on the bottom of your pan. You'll have to replace the seal as well. Make sure you use a putty knife and clean and scrape were the old seal was, if you don't clean it you'll have leaks. Good luck on your project.
To change the oil on a 2007 Passat 3.6 liter engine first safely raise the vehicle and drain all the oil from the oil pan by removing the drain bolt. Install the drain bolt, and remove the oil filter. Replace the filter and oil. Then lower the vehicle.
remove the plug in oil pan, drain the oil from the oil pan, re-place the plug. remove/drain the old filter, replace with a new filter, add oil.
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
snug