Remove the covers to your 1997 radio speakers. Remove the radio speaker retaining screws. Remove the wiring harness from the back of the radio speakers. Reverse the process to install your new radio speakers.
How to change door speakers on a 1997 mercury tracer wagon
Yes, an aftermarket stereo radio can replace a Bose radio in a 1997 Nissan Maxima. Remove the old radio from the dash and put in the new one. A new mounting frame might be required to make the new radio fit properly.
Back seat has to come out and the rear package tray too and then you can get to the bolts that hold the speakers in.
No, the radio has its own built-in amplifier. If you're not getting sound from ANY speakers, your radio is probably broken and needs to be replaced.
Try Crutchfield.com for installation kits.
You need to remove the rear seat, then remove the package tray.
Remove the speaker covers from your 1997 Mercury. Remove the door speaker retaining screws. Remove the door speaker wiring harness. Reverse the process to install your new door speakers.
Remove the covers from your 1997 Chevrolet rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
If the radio fuses have been changed on a 1997 Corolla and the radio still does not work, check to make sure the radio is not set to the CD or Tape player mode. It is also possible that the radio is not working because the speakers are not hooked up properly.
Unfortunately, a 1997 Toyota Supra engine and trans would not fit into a 1990 Mazda Miata. The Supra engine and transmission are unable to be mounted correctly within a Miata to make them fit.
To replace the EGR boost sensor on a 1997 Mazda Miata, first disconnect the negative battery terminal to ensure safety. Locate the EGR boost sensor on the intake manifold, disconnect the electrical connector, and remove the mounting bolts. Take out the old sensor and install the new one in reverse order, ensuring all connections are secure. Finally, reconnect the battery and check for proper operation.