Disconnect the battery then remove the fan shroud. Release the tension on the belt and pull it off the alternator pulley. I use a ratchet with a 3/8" drive inserted into the tensioner pulley for leverage, but I believe they have tool or pry bar for this. The alternator has three bolts keeping it attached, the two on the front are pretty easy to see and remove. On the back side of the alternator is a bracket attching it to the block. There is one bolt (don't remember what size) which is rough to get out. I was able to use a ratchet and deep socket to remove it. ONce I finally got it loose, I disconnected the wiring. Installation is the reverse!
Yes you can.
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
You failed to mention what year the S10 is but, most of them use a fusible link to protect the alternator circuit.
how do u replace a flywheel in a Chevy zr2 s10 2003 v6
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
The cost of the brake parts for the 1998 Chevy S10 truck range from 140.00 to 180.00. The cost of labor ranges from 45.00 to 65.00 an hour.
you can find it in your truck's manual. you should get directions inside on how to replace it.
It is inside the alternator.
It is built into the alternator.
1991 Chevy s10 how to replace outside window weather strip
You replace the brakes on an ABS S10 the same way you replace brakes on a non ABS S10.
how do you replace dome light in s10 chey blazer?