0
On the 1.6L cars, Remove the upper radiator hose and air intake tube. For the alternator belt, loosen the bolt that runs from back to front thru the adjustment mechanism of alternator belt(12 mm), loosen the adjustment bolt that runs from left to right (12 mm), pull up hard on the belt to pivot alt., change belt, use adjustment bolt to tighten belt. On A/C, P/S belt (I'm assuming) you have to loosen the adjustment mechanism on the P/S just like you did the alternator, but you also have to loosen the pivot for the P/S pump (14mm accessed thru the slots in the P/S pulley) and also the 14mm headed bolt that holds the adjustment bracket to the engine. Then push down on the pump to loosen the belt. Easy, squeezy.
What else can I help you with?
Will hard top for 1992 Mazda miata fit on 2002 Mazda miata?
Will a 1992 mazda miata hardtop fit a 2000 mazda miata?
How do you adjust the steering wheel on a 1992 Mazda Miata?
The 1992 Mazda Miata is equipped with a non-adjustable steering wheel.
Is there a hydraulic clutch on a 1992 Mazda Miata?
Yes, all miata's have a hydraulic clutch.
How do you change a headlight in a 1992 Mazda miata?
same as the 1994
How do you replace key for 1992 Mazda Miata?
To replace the key for a 1992 Mazda Miata, you'll need to visit a Mazda dealership or a locksmith that can cut and program a new key. Bring your vehicle identification number (VIN) and proof of ownership to assist in the process. If your key has a transponder, the locksmith or dealer will program the new key to match your car's ignition system. Otherwise, a simple key cut from a blank may suffice if your model does not have a transponder.
Where is the car jack located on a 1992 Mazda miata?
In the trunk, under the carpet.
Does 1992 Mazda miata have airbag?
The 1992 Mazda Miata does not come equipped with airbags. The Miata was designed before airbags became a standard safety feature in most vehicles. Instead, it focuses on a lightweight design and a fun driving experience, which was a hallmark of its appeal during that era.
How do you replace the radiator on a 1992 Mazda Miata?
To replace the radiator on a 1992 Mazda Miata, start by draining the coolant and disconnecting the negative battery cable. Remove the hoses connected to the radiator, then unscrew the mounting bolts that hold the radiator in place. Carefully lift the old radiator out and install the new one, securing it with the bolts, and reconnect the hoses. Finally, refill the cooling system with coolant and reconnect the battery before testing the system for leaks.
Will an Fl810 motorcraft oil filter fit my 1992 Mazda miata?
No, a FL810 Motorcraft oil filter will not fit a 1992 Mazda Miata. The Miata typically requires a specific oil filter designed for its engine, such as the Mazda part number B6Y1-14-302 or compatible aftermarket filters. Always check your vehicle's specifications to ensure you use the correct filter for optimal performance.
Where is the fuse for a 1992 Mazda miata fuel pump?
In a 1992 Mazda Miata, the fuse for the fuel pump is located in the fuse box under the dashboard on the driver's side. Specifically, it is usually the 15-amp fuse labeled for the fuel pump or EFI (Electronic Fuel Injection). You can refer to the fuse box cover for the exact labeling and location. Always ensure to check the fuse condition and replace it if necessary.
Where is the alternator located in a Mazda miata 1992 model engine the top of the bottom?
It is towards the bottom on the passenger (right) side of the vehicle.
How do you get the alternator out of a 1992 Mazda miata?
You take it out through wheel well On this page you have directions how to do it http://mx5unleashed.com/tech/starter-mx5.html
