0
go to your local parts store. get the right pads for your envoy. 1.remove cover protecting lug nuts, 2.loosen lud nuts..DO NOT TAKE OFF YET 3. LIFT VEHICLE AT APPROPRIATE JACK POINT (shown to you in your factory manual)it will be safer if you have jack stands for support. i don't just trust the jack provided. 4.once car is in the air take off lug nuts, and remove tire 5.you will see the pads and caliper. there are 2 bolts holding it in place. remove bolts with a 13 mm socket. 6. now with a caliper seperator you need to push back in the pistons( there are two and oval shaped. 7. once you do that replace the old pads with new and put everything back in its appropriate place, and repeat for the other side
What else can I help you with?
How do you replace wheel bearings on 2004 GMC envoy?
how to replace wheel bearings on 2004 GMC envoy?
How do you replace an alternator on 2004 envoy?
you take it out and put in a new one
Do you have to take alternator off to replace thermostat in 2004 envoy?
of corse
How much will it cost to replace tires on 2004 envoy?
about 150 dollars
How do you replace the timing belt on a 2003 GMC Envoy SLT?
The 2003 GMC Envoy inline 6 engine does not have a timing belt but a timing chain. No need to replace anything unless the chain breaks.
How do you replace a broken radio antena on a 2004 gmc envoy?
To replace a broken radio antenna on a 2004 GMC Envoy you need to unscrew the old antenna. Next, place the new antenna in the hole and screw into place.
Problems with your 2004 gm envoy the alarm is not activated?
my alarm does not work 2004 envoy
2004 gmc envoy with code po128?
2004 gmc envoy with code p0128
Show how to replace front right wheel bearing 2004 GMC Envoy?
Unfortunately,we have no way to show you or do drawings.
How do you remove fan shroud on 2004 gmc envoy?
How do you remove the fan shroud on a 2004 get envoy
How do you change the lower ball joints on an Envoy 2004?
How do you change the lower ball joints on an 2004 envoy
How do you remove the instrument panel on a 2004 Envoy?
We have full instruction on cluster removal and how to replace the stepper motors for the gauges. Use the search button "how to replace your stepper motors" www.trailvoy.com
