pop the cover take 4 screws out & put your new 1 in
6.5" round speakers.
Front Door Speakers are 6-1/2"
To replace the front door speakers on a 2002 Chevy Silverado, start by removing the door panel. This typically involves unscrewing any visible screws and gently prying off the panel to detach it from clips. Once the panel is off, disconnect the wiring harness from the old speakers, remove them, and install the new speakers by connecting the wiring and securing them in place. Finally, reattach the door panel and ensure everything is secured properly.
6 1/2" on front and back doors.
very carefully.
Yes you can put 6 speakers in a silverado, by instaling a 4 chanels amp for the front, and mono amp 1 chanel for the sub
6 3/4" Front Speakers and 4x6" Rear Speakers. Source: My 2000 Silverado LT Ext Cab 4dr 4x4 with Z71 pkg.
For the front speakers your gonna have to take the door panels off to get to all the wiring and everything and for the back ones you should just be able to take the plastic cover off and replace them
The front speakers, in your 2005 Chevrolet Silverado, measure four inches by five inches. The rear speakers measure six inches by eight inches.
Yes it will bolt right up.
In a 2000 chevy Silverado 1500 z71 the front door speakers are 6.5"
The stock speakers in a 1999 single cab Chevy Silverado typically measure 6.5 inches in diameter for the front door speakers. The rear speakers, if equipped, are usually 4x6 inches. It's always a good idea to verify the specific configuration, as variations may exist based on the vehicle's audio package.