It is easier to replace the whole hub assembly.
-remove wheel
- remove caliper, brake pads and disk
- disconnect tie rod end (separator required)
- undo strut mount bolts
- separate ball-joint (separator required)
Which speakers are you trying to replace? Front or rear?
go to you tube for a video on how to ...its there
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
The front wheel hub assembly will probably need to be pressed out if this is the first time the bearing has been replaced. Aftermarket bearings are not as close in tolerance as the original equipment and seem much easier to replace.
The front blower resistor on a 98 Dodge Caravan is replaced by removing the cover and disconnecting the wiring harness. The resistor can then be pulled and a new one put in its place.
how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
No
The front spindle must be removed as the bearing is pressed in. Not a job for a beginner, but if you have some auto expertise, not too difficult...
The 2002 Dodge Grand-Caravan has 39.6 in. of front head room.
The 2014 Dodge Grand-Caravan has 39.8 in. of front head room.
The 2014 Dodge Grand-Caravan has 58.4 in. of front hip room.
The 2001 Dodge Grand-Caravan has 39.6 in. of front head room.