The cover slides straight forward. Firmly pull, wiggling side to side, sliding toward the front of the car to release the latch. Gently lift straight up (the wires will remain connected to the lamp socket. Twist out bulb socket (counter clockwise) remembering the orientation for its return trip (it's a confusing socket). Or you can detach the wires from the socket to lift the entire cover away for easy access. Save yourself a half hour of service @ $95/hour.
Remove the center piece of trim on the inside of the lift gate. it just pulls off. then push up on the two tabs at the bottom of the light to remove it. then replace bulb with the correct bulb. .....
To replace the middle high brake light on a 1999 Lexus GS300, first, open the trunk and locate the plastic cover that conceals the brake light assembly. Carefully remove the cover by unscrewing or unclipping it. Then, disconnect the wiring harness from the old brake light, remove the old light bulb from its socket, and replace it with a new one. Finally, reconnect the wiring harness, reattach the cover, and test the light to ensure it works properly.
To change the high mount rear brake light on a Lexus IS300, first, open the trunk and locate the access panel on the rear deck where the light is housed. Remove the panel by unscrewing or unclipping it, then disconnect the wiring harness from the old bulb. Replace the old bulb with a new one, reconnect the harness, and reattach the access panel. Finally, test the light to ensure it’s working properly.
1992 Lexus ES300 center high mount stop (third 3rd brake light) light bulb lamp replacement procedure: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
Just unscrew it.
2000 Lexus GS300 center high mount stop (third 3rd brake light) bulb replacement: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
To replace the high mount stop light bulb in a Hyundai Sonata, first, open the trunk and locate the access panel or cover for the high mount light, usually found on the rear deck or trunk lid. Remove the panel by unscrewing or unclipping it, then disconnect the electrical connector from the bulb socket. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and then reassemble by reversing the steps. Finally, test the light to ensure it’s working properly.
take out old bulb & install new bulb . if can not do this come to repair shop . i fix that .
Open the trunk and there is a compartment that will expose the taillights. twist the bulb housing and pull it out.
how do you change the high mounted stop light on a lexus Is300?
Turn you high beams on and check your tail light. If its brighter, you have a head light bulb as a tail light bulb. 97-02 are the only ones that should do this. Find a tail light bulb and replace.(I couldn't believe it either).
you need to remove the rear seat