Here's a link to diagram if it helps http://www.bkhondaparts.com/billkay/jsp/prddisplay.jsp?catcgry1=ODYSSEY&catcgry2=2003&catcgry3=5DR+LX&catcgry4=KA5AT&catcgry5=FRONT+CYLINDER+HEAD&ListAll=All&vinsrch=no&systemcomp=Engine&prdrefno=&quantity=0&act=&count=0&hidSwitch=&hidIrno=
Hi The master cylinder in the odyssey is where the break fluid tank it located under the tank
how difficult is it to replace the MS on a 1996 Honda accord
If the Master Cylinder is defective then replace it.
replace rack and pinion on 2008 honda odyssey
how do you replace a 2000 handa odyssey radiator
Much better to replace the whole axle, look at www.happywrenching.com for a guide on how to replace an axle in a Honda Odyssey
Check the level of brake fluid in the master cylinder Make sure parking brake is fully released
When looking in the engine from the front of the vehicle, cylinder 1 is the right rear cylinder.
I just had to replace mine this week. I got mine at O'Reilly's for $25.
if i replace slave cylinder in 1994 Honda civic ex will this make my clutch disengage and engage correctlyanswerchange master cylinder and slave properly then bleed the system properly.
More than likely DOT3. If you will look on the top of the Master Cylinder cap, you will find the proper fluid listed.
The brake fluid master cylinder resivoir is located on the drivers side next to the firewall. Look at it and you can see the level.