Chevy Trailblazer

How do you replace the rear wiper blade on a 2008 Chevy Trailblazer?

234

Top Answer
User Avatar
Wiki User
Answered
2008-07-11 15:51:27
2008-07-11 15:51:27

go to your local auto parts store. it snaps on and off just like your front window ones.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


The 2002 Chevy Trailblazer takes 22" replacement windshield wiper blades on both sides front and a 16" rear wiper.


my 02 Chevy trailblazer rear wiper is not working



The 2008 Chevrolet Trailblazer takes a fairly specialized 12" rear wiper blade that is difficult to find at stores. See sources and related links below for more information about this special wiper blade.


Use a set of pliers and pull the wiper arm off the stud down where it meets the hatch.


Pop off the cap over the base of the wiper arm. Undo the nut .... replace arm. 10 minutes. If you order the new style wiper arm kit for 2007 and up it works way better! www.trailvoy.com Trailblazer enthusiasts forum run by true enthusiasts!


The 2009 Chevrolet Chevy HHR rear wiper blade size is a special 11" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade - you may just want to pick it up online. See the Sources and Related Links section below for more information on the wiper blade itself and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging. Very easy install.


It will depend on year. 02-06 will be standard hook. 07-09 rear wiper blade size is a special 12" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade - you may just want to pick it up online. See the Sources and Related Links section below for more information on the wiper blade itself and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging. Very easy install.


How do you remove and replace wiper switch on 2002 Chevy Cavalier


It is easiest to replace the back wiper blade by carefully prying off the cap at the bottom of the wiper and then remove the whole wiper arm. After that you will be able to easily replace the wiper blade per the instructions given by the wiper blade manufacturer. Once you have done that, simply reattach the arm and snap the cap back in place. This process will take you less than five minutes.


Take a close look at how the wiper blade is attached to the wiper arm to get a visualization of the attachment type. Then see sources and related links below for wiper blade installation videos.


To replace the rear wiper blade on a Chrysler Pacifica, you must first remove the old blade. You can remove it by pushing the small blade that holds the wiper in place up, and push the blade back. Once the blade is free from the hook remove it. Put the new blade in position so the hook is in position to go over the wiper attachment. Clip it into position and you are done.


Simply replace the wiper. If that doesn't work, the wiper arm may be worn out, and doesn't have enough strength left to hold it against the window.


how do you replace a wiper motor in a 2000 jetta?


The Lexus rear wiper blade size is a special 14" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade so please see Sources and Related Links below for more information on the wiper blade and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging.


Raise the wiper blade and hold. Pull the release on the bottom of the blade and wiggle it off.


The wiper motor is located under the black plastic cowl below the windshield.


are you serious... life blade off windshield, unclip plastic fastener off the center of the wiper arm, remove wiper, replace in reverse order.


Get the blade directly from a Subaru Dealer. The other brands do not fit . I've tried to adapt them, it will not work. Get the whole wiper blade arm and blade from Subaru only. Very expensive for a wiper blade around $18


If the front blower and the front windshield wiper do not work on a 2004 Chevy Trailblazer, it could be the fault of the relay switches on the blower and the wiper. Also check the fuse box on top of the battery for a multi-function fuse that might be blown.


Once you get the correct rear wiper blade, its literally a snap! The wiper blade is tough to find, however see below. Also see below for an installation video.


Look at the wiper arm where it attaches to the wiper blade. Then look at the videos below in sources and related links below. The replacement wiper blades should also have instructions on them.


Simple once you find the hard-to-find special rear wiper blade. See sources and related links below for an installation video and for info on the special rear wiper blade.


The 2004 Chevrolet Tahoe has hook-end wiper arms. Press a little tab where the wiper blade is inserted into the hook. Then pull the wiper blade out of the hook. Be sure to purchase the correct replacements first by looking up your vehicle in the wiper blade books at the store or lookup wiper blade size online. Below are some videos - watch the videos for U-Hook arms.


The hardest part is finding the replacement blade. See sources and related links below. After having new wiper blade in-hand, press the button or tab where the wiper blade is inserted into the hook on the arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make clearance for the hook.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.