Most of the times , you have to remove the carpet holders on the area where the light is located or(depending on model of car)remove the whole assembly of the brake light. Then you find the bulb that is not working, twist the holder, take it out, and make sure you buy the same type bulb(some have two connectors on the socket, some have just one, don't mix them up).
expose back of bulb, turn to the left, replace bulb, return to socket, turn to the right
how to replace brake light bulb fiat doblo van
How do you replace the rear brake light bulb on a 2001 Honda civic?"
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
3rd brake light or rear brake lights?
Bulb burnd out replace
Pull the carpeting behind the brake light. Unclip the assembly, replace bulb.
Open the truck and remove the two fasteners (left or right side) that secure the bungee net. This will allow the carpet liner to be pulled forward to access the brake/running light bulb. Twist the bulb socket to remove the bulb.
Remove the Phillips screws holding the lens in place, remove the lens, push bulb into socket and rotate counter-clockwise, reverse procedure to install. There are three light bulbs when the brake light column is taken out. If just my brake light is out, which bulb needs to be replaced?
Just unscrew the rear brake light, turn out the socket, and replace the bulb.
remove bulb from in side the boot
To replace the brake light bulb you need to remove the whole light assembly. Once removed the change is simple.