If you are talking about the engine coolant stat you need to follow the lower radiator hose towards the engine. Before removing anything the engine must be cool and the coolant has to be drained. If this is met remove the hose and the coolant temperature sensor. Then remove the two bolts on the thermostat housing. Remove the stat and replace. Replace the hose and sensor. When replacing engine coolant you must bleed out ALL air. This can be done by the bleed plug at the cylinder head. Just loosen and retighten when all air is removed. If any questions arise you can pick up the Haynes Manual from most Parts stores. I think it is better for pictures and explanations.
Wiki User
∙ 2015-07-16 18:32:26The thermostat is located at the other end of upper radiator hose.
Where_is_the_thermostat_on_1987_acura_integra
On the other end of the large top-left radiator hose.
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
just follow the lower radiator hose to the engine and that is where it is sitting@
Follow the lower radiator hose from the radiator to the engine, that's where it is.
If yoor 1996 Integra has the1.8L engine, the thermostat is located at the back of the motor at the end of the bottom radiator hose.
right top of the radior hose first take off the bolts (must be 2) take out the cap, then you will see a thermostat inside then just replace it, that's it! how easy
Replace your thermostat.
The thermostat on a 95 acura integra ls is located on the left back side of the engine. below the intake. You will see a sensor plug-ed into it. The thermostat has 2 ten mill bolts holding it together and they are a pain. The best tool for the job is a ratchet wrench.
about 90,000 miles
how do you replace an alternator on a 1990 integra