Ford Contour
Thermostats

How do you replace the thermostat located on a 1998 Ford Contour?

697071

Top Answer
User Avatar
Wiki User
Answered
2015-07-16 18:04:02
2015-07-16 18:04:02

It is not at the end of the upper radiator hose. Please don't follow the first person answer.

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


The thermostat on a 1998 Toyota Corolla is located next to the alternator. The alternator may have to be taken off to replace the thermostat.


Thermostat is located inside water outlet. You have remove the outlet if you want to replace the thermostat.


If this is a 2.8 V6 the thermostat is located on the front of the engine. Ask 'Where is the thermostat located on a 1995 Audi A6?' on this site and you'll find someone has done a great job of explaining how to find and replace the thermostat.


where is egr valve on 1998 ford contour


The thermostat is located by the side of the cylinder block near the coolant inlet. Remove the coolant inlet housing after disconnecting cables and loosening the holding bolts. You will be able to remove the thermostat to replace it.,


follow the top radiator hose to the intake. it should be there.


First the thermostat must be located on the 1998 Toyota Rav 4. The thermostat housing is on the left side of the engine under the exhaust manifold. The lower radiator hose flows directly to it. Drain the coolant, remove the hose and mounting bolts. Replace the thermostat from the inside of the housing and reinstall.


located at the end of the upper radiator hose. remove two bolts, replace with new parts remember to replace the gasket.


To replace the thermostat on a 1998 Cadillac, locate the area you will be working in. The thermostat is located at the rear of the engine on the drivers side. Then locate the upper hose. Remove the upper hose from the housing and disconnect the unit. You can then safely replace the thermostat piece.


how do you replace the thermostat on Audi A-6 year 1998 model quadro. 2.8 cilinders


The thermostat is located on the top of the engine, where the top radiator hose is connected. The hose has to be disconnected, and the inlet on the engine is removed, with the thermostat underneath.


follow the top radiator hose to the engine remove three 10 mil bolts replace o ring


The Temperature sensor for the computer is on top the head. The temperature sensor for the temperature gauge is located under the Thermostat housing.


It is located in the front of the engine towards the top. If you follow the radiator hose it will lead you to the thermostat. There are two bolts that hold it in place. You can remove the bolts fairly easily and replace the thermostat. It is important that you make sure that everything is clean when you reassemble everything.


The Ford Contour was produced from the years 1995 to 2000. The front pump transmission seal in a 1998 Ford Contour is located very close to the camshaft.


According to Advanced Auto Parts the Thermostat is located on the lower radiator hose at the engine. Thanks, Kit


The thermostat is located on the engine on a 1998 GMC Sierra 1500 standard. The thermostat can be found by following the upper radiator hose directly to the thermostat,



To replace a thermostat on 1998 Silhouette, locate it under the top hose assembly inside the radiator. It is fairly easy to replace with the right tools.


Look for a removable housing at the engine end of the upper radiator hose


tak off air cleaner part that is in way the remove two bolts on thermo housing replace thermostat put car back together AMRL101@sbcglobal.net


Are there any steps on how to change the alternator on a 1198 ford contour?


The thermostat in a 1998 Hyundai Accent is located on the engine block. The thermostat can be found by following the upper radiator hose to the thermostat housing.


I have a 98 626es v6, thermostat is located under air filter housing on the right side of the engine if you are standing at the front of the car facing the engine


The thermostat on a 1998 Isuzu Trooper is located on the front of the motor. It is in the top radiator hose where it connects to the motor. To access the thermostat, the hose needs to be disconnected from the motor.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.