drain the radiator down below the top hose and unhook the hose from the radiator and the engine and pull the hose off.
It is under the housing that the upper radiator hose hooks to on the engine.
It is under the housing that the upper radiator hose hooks to on the engine.
It is under the housing that the upper radiator hose hooks to on the engine.
The thermostat is under the housing where the lower radiator hose attaches to the engine.
It is at the end of the lower radiator hose on the motor. You will have to empty the radiator and remove the housing to replace it.
It is under the housing where the lower radiator hose hooks to the engine.
It is under the housing where the lower radiator hose hooks to the engine.It is under the housing where the lower radiator hose hooks to the engine.
remove the thermostate housing. It is on the front of the engine and is connected to a hose that goes to the radiator.
Drain the radiator. disconnect the top radiator hose from the engine. Remove the water inlet that the hose was hooked to. The thermostat is in the housing. Replace the gasket when replacing the thermostat.
No, you do not have to remove the engine to replace a radiator hose.No, you do not have to remove the engine to replace a radiator hose.
Four cylinder, under the housing where the upper radiator hose attaches. Six cylinder, under the housing where the lower radiator hose attaches to the engine.
Drain the radiator. Remove the radiator hose. Remove the inlet from the engine. The thermostat is in the inlet. Replace the inlet and the gasket, and reverse the procedure to finish the procedure.