The water pump on the Quad 4 engine is located on the bottom of the engne, pointing towards the center of the car near the crankshaft pulley. It is driven by the engines timing gear and not a belt. Changing the pump is a very difficult job that you may not want to do in your driveway or garage. The car needs to be up on a rack so you can get some working room. I would recommend you take to a shop and let them have all the fun!!
how do i replace a water hose in 1993 pontiac grand am
Need to replace fuses on 1993 Grand Prix. Need to know ampere and color of the fuses.
remove the exhaust manifold (its under it) if it is a single or dual over head cam engine
How do you replace the panels on the outside of a 1995 pontiac Grand am?
A 1993 Pontiac Grand Am weighs approximately 2,828 lbs. The Pontiac Grand Am stopped production in the year 2005. The car was replaced with the Pontiac G6.
My grandson had to replace the motor mounts on his Pontiac Grand Prix last year and now the mechanic says they need replaced again. He has hardly driven it. How can that be
you dont have to you just add more if low
yes it will pontiacs are interchangable from the years 1993-1996
It's tough for an amateur. The heater core is inside behind the console.
Does a 1993 Grand Am have air bags
www.autozone.com is a wealth of information with pictures, too.Click on the left side where it says Repair Info. Select 1993, Then Pontiac, Then Bonneville, then water pump. It helped us.
underneith the front bumber twist counter clockwise replace bulb
you could try autozone.com that's where i go if i don't have the manuale for the car im working on
If your 1993 Pontiac Grand Am will not shift into part, the transmission is probably seized up. The first step is ensuring the transmission fluid is not too low.
if you need instructions and diagrams, BUY A REPAIR MANUAL FOR 15 BUCKS
The remote trunk release for a 1993 Grand Prix is in the gove box.
The camshaft sensor on a 1993 Pontiac Grand Am is located behind the rear bearing cap. It detects the position of the camshaft as it rotates and relays this information to the computer.
The blower rheostat on a 93 Pontiac Grand Am is located inside the engine bay, just to the right of the blower fan housing. It is almost directly behind the trans dipstick. It isn't that hard to replace.
I know it will feel like you're going to break it, but if you firmly pull, it comes off. Replace bulb and snap it back on.
remove belt pump is accessable remove bolts make sure coolant is drained first replace
collant will start coming out of the hole where the a.c. condensation water comes out against the firewall
how do you replace a water pump on a 1993 lexus es300?
Check the temperature sensor
Usually against the passenger firewall