acquire (2) 3" long coarse thread M8 bolts, set aside. remove main belt, belt tensioner pulley, belt tensioner bracket. then remove the timing chain tensioner cover located below-left of the the passenger-side motor mount, and the water pump cover located just below-right of the same motor mount. push the tensioner piston in and lock the piston in place by using a smaill nail, or push pin inserted in the hole.. youll see it. then rotate the engine counter-clockwise 20-30 degrees to free up chain tension on the water pump. Remove the bolts holding in the pump. Now using the 2 M8 bolts, thread them into 2 of the same top and bottom bolt holes evenly to pop out the pump. be sure to keep an eye on the chain as it can hold the pump in and hamper your efforts in getting the pump out. Make sure to lube up the 2 o rings on the new pump real slick, and pop it back in place. installation is the same, only backwards and without the M8 bolts. dont force the pump in... good luck!
what year maxima? 1989-1994 on the bottom.. 1995-2000 in the middle..
No
no
Yes, those are the same engines, should be no problem
how to replace water pump on Nissan quest 3.0 1995
Remove engine, disassemble, replace piston, re-assemble engine and install. Good times!
Size for a rear speaker in a 95 Nissan maxima
'Where is ignition coil 2 in a 1998 Nissan maxima'?
what parts needed to tuneup 1995 nissan maxima
check your brake light ...then replace the stop/horn fuse
remove front door panel 1995 Nissan maxima
yes All 95-99 Nissan Maxima's have the same body (A32B) and same lug pattern and offset.