To replace the window washer reservoir, you must first locate the reservoir under the hood, usually along the side fender area. (You can follow the rubber hose that is attached to the spray nozzle down to your reservoir). Now detach the two wires connected to the little pump motor inside the reservoir, and any bolts securing the reservoir to your car. You may need to look for the bolts. Take your time, figure out how the thing is secured, and get er out of there. If the thing is buried, you may have to remove another part to get to the reservoir. If this is the case, take your time (maybe take a picture), keep track of your nuts and bolts, and keep with it. Good Luck
The reservoir for the windshield washer fluid is low.
It depends on the vehicle but in many vehicles the washer pump is attached to the washer reservoir. If yours is not the case please give us more info on the vehicle and repost.
It's attached to the bottom of the washer fluid reservoir. Typically they put the bottle behind one of the fender splash shields
The windshield washer motor is located on the passenger side firewall
It should be inside the windshield washer fluid tank
On ours, it is behind an access panel in front of the RH tire.
get some1 else to do it
you have to remove the plastic cover under the fender, after you should be able to figure it out. it's very simple.
The windshield washer pump is attached to the washer fluid reservoir. You will find 2 pumps attached to the reservoir. The other pump feeds the rear window. The reservoir can be unbolted and removed from the engine compartment.
I believe you have to remove the battery, battery tray and then the washer fluid reservoir, now you can remove the pump from the reservoir.
2004 Chevy Cavalier windshield washer fluid reservoir retaining bolts. Remove the windshield washer fluid supply tube. The windshield washer fluid reservoir will come free.
The pump for the rear window is on the side of the reservoir and the pump for the windshield is on the front of the reservoir
The windshield washer pump is located on the water reservoir. Remove the wheel on the driver's side and then the cowling around the wheel well that is in front of the wheel. Once it is off, the windshield washer pump on the water reservoir will be visible for easy replacement.
You have to remove the washer fluid reservoir and remove the pump from the bottom area of its side.
reservoir to hold washer fluid
Mounted on the bottom of the washer fluid reservoir.
It is located on the bottom of the windshield washer reservoir.