How do you replace turn light bulb on a 2004 Buick Lesabre?

Answer 1

Front - remove head light assembly - 2 bolts on top of assy and pull it forward (there is a locator pin at rear of assembly that fits into hole for alignment when re-assembling. You can then reach down and remove the turn lamp assembly. There is a tab that you have to squeeze on the assembly and then turn counter-clockwise 1/4 turn and pull out. Rear - remove plastic trim that runs from side to side on the back wall of the trunk (nearest to you when standing outside the trunk. Unscrew 4 plastic knobs that trunk net attaches to and pull it straight up (there are 4 plastic prongs holding it to the sheet metal across the width of the trim). then pull the trunk liner away from the wall and you will see 4 or 5 bolts sticking out with nuts. Three of these hold the lamp assemby to the car but I don't recall which ones they are - just loosen them all and wiggle the lamp assembly to see which ones to remove completely. Lamp holder is removed from the assembly using same squeeze, turn method used on front lamp.