They unscrew from the back of the light assy. You may have to remove the light to get ot it.
Mercury capri glove box light.
First remove the gray cover behind the light in the trunk. You should then have acsess to the bulbs.
No
unscrew the 2 screws holding the light in. pull the light out. replace the light.
As this is an intermittant problem it is more than likely the brake light switch is sticking at times..
u cant
Chainsaw?
You should be able to go under the hood and remove a cover. This should reveal the back of the light enclosure. Just remove the bulb and replace it with a brand new one.
To change the turn signal light in the 2003 Subaru Baja you need to have a tool box with the necessary tools. Open the screws to access the turn signal light and replace it.
To replace the side signal light on the side mirror of a 2002 Mercedes S430, first, carefully remove the mirror cover by prying it off with a trim tool or flathead screwdriver. Disconnect the electrical connector from the signal light assembly, then remove any screws or clips securing the old light. Replace it with the new signal light, reconnect the electrical connector, and reattach the mirror cover, ensuring it's securely in place. Finally, test the new signal light to confirm it functions properly.
Unplug the whole light assembly from the bottom front of the car it just pops out to replace the turn signal bulb-same on the rear but you have to remove the trunk lining first.