The 2004 Toyota Sequoia has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 2007 Toyota Sequoia has the most common hook-end wiper arms. See sources and related links below for installation videos. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
First, get the correct replacement wiper blades. They will have instructions on them. The 2004 Toyota Sequoia has hook-end wiper arms. There will be a little tab or button where the wiper blade is inserted into the hook on the arm. Press and pull wiper blade out of hook. Sometimes you have to rotate and flex the blade a little bit in order to create clearance. See video below for hook-end arms.
The 2008 Toyota Sequoia has the newer-style pinch tab wiper attachments. See sources and related links below for wiper blade installation videos and correct wiper blades. Basically pinch the tabs on both sides of the attachment and swing that side of the blade downwards out of the arm, then remove it from the tiny hook.
Two 19" blades for the front and one 14" blade for the rear. You must go to the toyota dealer for the rear wiper blade but the front wiper blades are available aftermarket. See sources and related links below for more information.
stick the wiper blade up your hole - I can't figure it out either.
Once you get the correct rear wiper blade, its literally a snap! The wiper blade is tough to find, however see below. Also see below for an installation video.
The 2003 Toyota Sequoia has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 2005 Toyota Sequoia takes 19" wiper blades on both sides front. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
2009 Toyota RAV4 rear wiper blade replacement procedure is extremely simple once you find the hard-to-get special rear wiper blade. See sources and related links below for installation videos and wiper information.
The 2008 Toyota Rav4 takes a fairly specialized 12" replacement rear wiper blade that is hard to find in many areas. Once you get the correct wiper, the installation is literally a snap. See sources and related links below for the special rear wiper blade information as well as rear wiper blade installation videos.
The Toyota Highlander rear wiper blade is held in place by two retaining clips. Remove the retaining clips and the wiper blade will slide out.
Its easy once you get the special hard-to-find replacement rear wiper. See sources and related links below for wiper blade information and wiper blade installation videos.