Ford

How do you reset airbag alarm on ford galaxy?

012

Top Answer
User Avatar
Wiki User
Answered
2014-07-13 13:08:15
2014-07-13 13:08:15

Fix the problem with the air bag system and the alarm will reset itself.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


how do reset the airbag light on a 94 ford escort


How do you reset the alarm for a Ford Laser


airbag warn light doesn't come on at all


i have a 98 ford expedition xlt the remote does not work how do i reset the alarm so it will work


When the airbag alarm goes off, it means that something is wrong. A person can change the fuse, or go see a tech specialized in this area to fix it.


If you mean that you have a warning light on, then once the problem that is causing the airbag warning light to come on is diagnosed and fixed, the light will reset itself.


Your Ford Escort, airbag linking light is an indication that the airbag is malfunctioning. You should visit your local Ford dealer to make sure the airbag is functioning properly


this is my own answer,no airbag will be ok, the only problem is you have to reprogram instrument cluster and ford are the only one that can do this at a cost of £119.00+ vat.


You find problem and fix it . then the airbag light will go off.Airbag system checks itself and if no problem is found ,light will stay off.I just fixed a 42 on mine .bad connection.There is no reset on airbag monitor system.


sorry , I don't believe there is one i called ford service center and was informed there is no reset button for ford freestar 2004. either i had to order a new airbag system or get to module computer a bypass to reset computer.


pull the bulb out on the gages. light should go off.


I replace engine but now it wont start.


turn it off with the remote or you must use the key in the door.


It can't be done. Either your airbags are blown, or there is a problem with the system. It's a safety system, and therefore doesn't have a "reset".


what are the airbag codes in a ford E350



You need an auto locksmith that can input commands to ECU


Push & hold the ON/OFF button for ~12 sec.


hey, you will probly need to go to your ford dealer nearest you.


If your 2002 Ford Explorer alarm system goes off by itself, you probably have a wire that is exposed or a connection that is not completely closed. Check all wires for the alarm system and reset the system itself.


Where is the airbag module on the 2000. Ford expedition


How do you remove the bottom front right airbag on a 2011 ford fiesta.


Ford Galaxy was created in 1995.


Code 19 for a 99 Ford Taurus means the restraint control module crash data memory is full. If you replace the RCM, the code will reset.


The airbag code 52 on a 96 Ford Windstar often means nothing more than that there is a loose connection in the electrical system. The code can be reset by disconnecting the battery for about 10 minutes, then reconnecting it. If that doesn't work, the code may also be indicating that the airbag itself is not getting power and requires servicing.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.