how to rest airbag light on VW t5 ,thanks
You buy a new one. They do not reset.
Disconnect the battery. this should work.
how do you reset the passenger side airbag on a 2000 passat?
To reset the airbag light on a VW Sharan, you typically need to use an OBD-II scanner that can access the airbag system. First, connect the scanner to the vehicle's diagnostic port and turn on the ignition without starting the engine. Follow the scanner's prompts to read and clear any airbag fault codes. If the light persists, it may indicate an unresolved issue, and you should consult a professional mechanic.
To reset the airbag sensor in a 1999 VW Cabrio, you typically need to connect a diagnostic scanner compatible with the vehicle's airbag system to clear any fault codes. Alternatively, you can disconnect the car's battery for about 10-15 minutes to reset the system. After that, reconnect the battery and check if the airbag warning light is off. If the light remains on, it may indicate a persistent issue that requires professional diagnosis.
You don't; your local VW dealer does. ;)
Press milage button turn Ing on Turn clock button to the left and turn Ing off.:)
To reset the brake warning light on a VW Transporter, first ensure that the brake fluid level is adequate and that there are no issues with the braking system. Turn on the ignition without starting the engine and press the accelerator pedal three times within 10 seconds. After that, turn off the ignition. If the light remains on, it may indicate a persistent issue that requires further inspection.
How do you reset dashboard brake light on vw passat
You have to repair the cause of the light coming on. The airbag computer will have set a code about the cause. See related question for more info.
There is nothing to "reset" for the 1999 VW Beetle.
The tank capacity of a T4 VW Transporter is 70 Liters.