To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
up under the dash by your right knee.
please tell me how to reset the computer on a 2008 5.7 Toyota tundra. all my dash lights are on. thanks, Patrick ANSWER: all you have to do is remove the positive terminal on your battery and that should work. but be carefull while doing this as you should remove the ground first to prevent shocking/shorting.
The 2003 Toyota Tundra OBD 2 port is under driver side dash above accelerator pedal
There is a button under the dash in front of your right knee
press and hold trip/reset button turn key on, do not start. Wait for dash lines to go off in odometer reading space, once they have gone off release trip/reset button, turn key off: that should reset light.
The 2002 Toyota Tundra OBD 2 port is on lower edge of dash/ next to console; connector faces down
On the super monitor on dash hold right button to reset
If you have one it's on the drivers side up under the dash by your right knee.
how to reset tire light
On a 1996 Toyota Prado the dash board is removed & one will find a reset button with the letter "T", this button is switched off. Once this is done the T-Belt light should be reset & you will no longer see the T-Belt symbol lit up on the dash.
The reset switch for the fuel pump on a Toyota Echo depends on the year it was made. It is either in the trunk, under the carpet, or it is under the passenger side dash.
there is no reset button there is a circuit opening relay under the dash you can check it with an oms meter