turn key to on without cranking the engine then press the trip meter lever for a few seconds until the meter reads zero
How do you reset maint read light on 2010 corolla
turn key to on without cranking the engine then press the trip meter lever for a few seconds until the meter reads zero
Maint. required light want reset.
If it is the check engine light is different than the Maint req'd light (for oil changes). The MAINT REQD light is simply a timer for oil changes. Here's how you get reset the MAINT REQD light: 1) put the key to the ON position 2) press the mileage reset button on your cluster so it shows total mileage (not trip) 3) put the key to the OFF position 4) press and hold down the mileage reset button, leave it pressed 5) put the key to the ON position 6) wait until the mileage shows 000000 and you can stop pressing the ODO button
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
With the ignition off, push and hold the trip reset button. While holding the trip reset button turn on the ignition and look for five dotted lines. When the five dotted lines disappear you can release the trip button and the maint reqd indicator will clear.
The answer is in the manual.
The maintenance required light requires a scan tool to be reset.
You do not have to reset the computer. It will take care of itself.
Hold down the "trip reset" button with the ignition off and keep it pressed while you turn the ignition on
read your owners manual
WWW.VEHIX411.COM free video instructionsEvery 5,000 miles an oil change indicator light that reads, "MAINT REQD" is automatically switched on in many new vehicles manufactured by Toyota and other auto makers. This light is not an emergency, but rather serves only as a reminder that it has been 5,000 miles since your last oil change. The MAINT REQD light is basically an oil change reminder.Of course, if you get your oil changed at the dealership, they will turn off the MAINT REQD light for you, but if you change your own oil, or go to a quick lube shop, you may be stuck with this oil indicator lit. Here is a very simple four step process that should turn off the MAINT REQD light for a majority of Toyota vehicles, and possibly other brands as well (before performing this procedure, please check with your owner's manual to make sure that the MAINT REQD light is described as an oil change indicator light):• Turn your ignition key to the 'ACC' or 'LOCK' position.• Press and hold the trip meter reset nob (next to your odometer).• While holding the trip meter reset nob, turn the ignition to 'ON', but do not start the car.• Hold the meter reset until the MAINT REQD light switches offOR YOU CAN WATCH A FREE VIDEO ON HOW ITS DONE GO TO WWW.VEHIX411.COM