press the reset button nope, that does not do it. whoever gave that answer (press reset button) must be joking. the proper procedure iswith engine shut offyou then proceed to disconnect the battery andleaveitdisconnected for a few minutes (15 minutes should be enough). this will erase the "driver profile" in the ecu. then reconnect the battery, start theengine, turn on the a/c AND let it idle for about 20-30 minutes. this idle time is very important since it allows the ecu to reacquire the engine parameters it needs.if you don't let it idle for at least20 minutes then you'll see your mileage go down and it may not shift right (for those with a/t). also be sure to keepthe transmissionin park or neutral so as not to interfere with the ecu resetting itself. don't press the brake or accelerator pedals either.
DISCONNECT THE BATTERY FOR A FEW MINUTES.
MITSUBISHI LANCER 2000 16V TURBO EVO3 MD322364 27C256 0892 MITSUBISHI LANCER 2000 16V TURBO EVO3 E2T38387 MD 2648 27C256 D836 MITSUBISHI LANCER 2000 16V TURBO EVO3 E2T37281 MD173634 27C256 F842 MITSUBISHI LANCER 2000 16V TURBO EVO3 MD166260 27C256 C6F5 what is Ecu serial code number for 2001 MITSUBISHI ECPLISE SPYDER ?
where is the fuel pump relay fr 2000 lancer
The 2000 Mitsubishi Lancer 1.8 liter 4 cylinder car will hold approximately 4.5 quarts of oil. The recommended oil type is 10W30.
6 inch. Anything larger and you have to start creating larger holes ;)
You have to get a code for it. You can get from the internet ir Mitsubishi, but its not free.
A 2.0 from a lancer fits and bolts up in same spots
disconnect the battery cables overnight and it should reset the computer
Not necessary. The computer will reset itself after a few driving cycles.
The computer on a 2000 Chrysler Sebring is reset by disconnecting the battery for 10 minutes. This forces it to power off and restart.
You cannot reset a code. Take out your radio. Check the serial number on it and call Mitsubishi dealer. They will check a database and give you a code.
battery