A scan tool is required.
To reset the engine light in a 2003 Dodge Caravan, you can disconnect the negative battery cable for about 10-15 minutes. This will clear the engine codes and reset the light. Alternatively, using an OBD-II scanner to clear the trouble codes can also reset the engine light. However, ensure that any underlying issues causing the light to illuminate are resolved before resetting it.
The only proper way is with a scan tool.
To reset the check engine light on a 2001 Dodge Caravan, you can disconnect the negative battery terminal for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-II scanner to clear the codes directly if you have access to one. However, if the underlying issue is not resolved, the light will likely come back on.
Resetting an engine light on a 1996 Dodge Caravan SE is very easy to do. The battery can be disconnected for up to one minute to make the check engine light go off.
try disconnecting battery for 15 minutes
You can disconnect the neg. battery cable but you also reset everything radio, clock etc.
The change oil light is reset by turning the key on, engine off, and pressing the gas pedal three times.The check engine light can only be reset with a scan tool. The cause of the fault needs repaired or the light will return.
A Dodge Caravan does not have an inertia or reset switch.
With an OBD2 scan tool.
The light will reset itself when the cause of the code has been repaired.
A Dodge Caravan does not have a reset switch.
To reset the change oil light on a 2013 Dodge Grand Caravan, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, the oil change light should turn off. If it doesn't reset, repeat the process to ensure it was done correctly.