With the key "off", push and hold the odometer reset button. With your other hand, turn the key to the "On" position. The odometer will count down dashes(-) and then display 000000. Let go of the odometer reset button. Turn key off and then on and start the engine. "Maint. Required" light should stay off
Press and hold the odometer reset button while at the same time turning the ignition to the on position. Do not start the engine. After around 5 seconds the maintenance required light will reset.
Depends on the make, model, and year vehicle you failed to list.
To reset the maintenance required light, turn on the ignition without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine; the maintenance light should be reset. If this doesn't work, consult your vehicle’s manual for specific instructions related to your model.
how to reset a srs warning light on 307 203 model
The maintenance required light requires a scan tool to be reset.
how to reset the vigo timing belt warning light
aperantly take the light out
How do reset the oil service light on a 2001 polo?
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
Just found out that it must be reset at the dealership with a diagnostic computer
To reset the periodic maintenance required light on a 2011 Mitsubishi Montero Sport, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within ten seconds. After that, turn the ignition off, and the maintenance light should be reset. If it doesn't turn off, repeat the procedure.
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.