on the upper left side of the guages there is a button labeled "reset". with the key off hold the button in, then turn the key on. the light should flash for a few seconds then turn off.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
Check your maintenance manual. It's in there.
fill all 5! tires to the proper pressure, even the spare will transmit and trip the light
Yes, there is. For instance, if the engine does require some attention.
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.
have you tried pulling the EFI fuse
Turn the 4Runner on, make sure that you are looking at the "odometer" miles and not the "Trip" miles. Turn the 4Runner off, hold the "reset" button, turn the 4Runner On and the "MAINT" light will blink 3 times. Release the "reset" button and the light will turn off. This worked great for me but the light flashed 5 times then went off. 2007 SR5 4WD 16,000 miles recently purchased from dealer hopefully there is nothing else wrong/ FYI the manual told me that the maint light is for oil change.
Brake system warning light.....
warning light symbol of car with wrench in middle It means maintenance is required.
There's a Phillips screw at the top of the marker light. You would need to unscrew that and then you will be able to remove the side marker light from your Toyota 4Runner. We have also included a link to a video in the related links section below.
Tire pressure warning light