PRESS AND HOLD DOWN THE BOTTOM LEFT BUTTON ON THE STERING WHEEL UNTILL IT RESETS TO 100%
PRESS AND HOLD DOWN THE BOTTOM LEFT BUTTON ON THE STERING WHEEL UNTILL IT RESETS TO 100%
On a 2002 Envoy you turn the key to run but don't start it. Then push and release the gas pedal 3 times within 5 seconds. The change engine oil light should blink for 5 seconds meaning you have reset the system. If it doesn't blink for you do the procedure again.
How to change brake pads on 2002 GMC Envoy front brakes.
The pump is in the gas tank and the tank has to come down to change it.
Where to hook code reader 2002 envoy
where is the oil filter located on an 2002 GMC Envoy
GMC Envoy was created in 2002.
Hold reset button for about 5 seconds then it should reset.
There are 2 BCM's on my 2002 GMC Envoy. The first in under the left side of the rear seat. (This is the one I had to change on mine) The second is in the rear liftgate. You'll have to remove the panel to get access to it.
Riunning lighs not working 2002 gmc envoy
On a 2002 Envoy you turn the key to run but don't start it. Then push and release the gas pedal 3 times within 5 seconds. The change engine oil light should blink for 5 seconds meaning you have reset the system. If it doesn't blink for you do the procedure again. I'm pretty sure its the same on a 2003. Good luck.
If system was opened to the atmosphere it will have to be evacuated prior to charging
We have detailed headlight change procedures at our enthusiasts forum www.trailvoy.com