0
How do you reset tire pressure on a 2004 impala without the radio?
Wiki User
∙ 13y ago
America Tires stores have done this for me w.o. charge several times and they manipulated the headlight switch to achieve this. Probably any tire store will do this for you for goodwill.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you reset impala after battery change?
There is nothing to reset except the radio presets and the clock.
How do you reset the tire pressure gauge on a 2004 Chevrolet Impala?
With your ignition in the on position, but the car not started. Press and hold the disp button on the radio for about 5 seconds. On the radio the word settings will appear at which point you can scroll through the setting by pushing the next or prev buttons. When you get to tire pressure you can reset it by pushing the disp button.
Reset low tire pressure light for 2002 Chevy impala?
! If you want to turn it off turn the radio off and hold the DISP button for 10 seconds, this activates the setup menu. Scroll through until you see Tire Pressure and reset it. The car does not come with an active tire pressure management system, when it detects low pressure you will HAVE to reset the light.
How do you turn off change engine oil and low tire pressure lights on 2000 Chevy Impala?
Both are reset through the radio * ** *** Note: to reset the "Change Engine Oil" lite, press the gas pedal to the floor 3 times in 5 seconds (vehicle in ON position, but without starting engine). I just did this to my vehicle and it works. As far as the tire pressure, inflate tires to 32 PSI. Should work. * To reset the tire pressure indicater on models without the RDS radio, check your tires to be sure of proper inflation. Then pull the headlight switch to the running lights position 3 times (on, off, on, off, on). You will here a beep when the sensors have been reset. The sensors on the tires will trigger if there is a 7 lbs pressure difference between the highest and lowest tires.
How do you reset low tire pressure light on a Chevy Impala 2000?
The low tire pressure is reset through the radio Turn on the ignition to the point where the lights on the dash are on but the engine is not running. Then pull out the light switch until the parking lights come on. Then press in until they go off. Do this three times and you will hear beeps in rapid sequence. Then the pressure light will go off.
How to reset tire sensor 2007 Chevy impala?
press the CHECKMARK after choosing the OIL PRESSURE option in the menu
How do you reset the low pressure tire signal on a 2002 Chevy Impala?
This is were gm wants you to go the dealership (it isn't easy to find in the owners manual), i cant imagine why the book wouldn't really tell yeah were? lol Our 2004 Impala LS w/ a single CD player radio The info starts on page 5-66 under "Tire pressure Monitor System" hope it helps. SW in Az If you cut off the radio press and hod the the tune button until tire pressure pop up then press the tune button again and it will reset.
How do you reset the low tire pressure on a 2004 Chevrolet Tahoe?
It is reset with the radio controls, Listed in your owner's manual.
How reset low tire pressure light on a Chevy impala 2004 with aftermarket radio?
I have a 2004 Impala SS. I currently have a aftermarket deck, the only other way to turn off the low tire pressure light is either 1) bringing it into the dealer, or 2) turn your key to the accessories position, turn your lights on and off three to five times, and it should have shut off your low tire pressure light.
How do you reset the monitor to turn off the low tire pressure warning in a 2003 Chevy impala?
disconnect your battery and then reconnect. The light should reset and turn off.
How reset low tire pressure light on a Chevy impala 2003?
turn the parking lights on and off 3 times
How do you reset low tire pressure light on 2004 impala?
You have to hold down the upper left radio button for about 10 seconds or more (I think is the volumne but I cannot remember). Then a menu will come up and you use the right arrow button until you get to tire reset then press 3 until it clears.
