toinks... e akin nga tinatanong kung anong sagot ! talaga nga naman oh ... hahaha =))
spin it out! - Oil will come to the top
Yes, it is possible to separate oil from water using a method called electrocoagulation. In this process, an electrical current is applied to the mixture, causing the oil droplets to coagulate and separate from the water. The separated oil can then be skimmed off the surface.
Yes. Oil is a mixture so physical methods are appropriate. Fractional distillation is the physical process used in oil refineries to separate the oil into different, saleable parts.
Oil and water separate because oil will float to the top and water will sink to the bottom. The reason oil wil float to the top because oil is non polar while water is compound polar. Separation by decantation and filtration.Separation by decantation and filtration.
Allow the mixture to sit until the oil and water have separated. Then pour off the oil.
The gearbox oil is separate from the engine oil on a 2002 1.4 Astra, and much thicker.
First, use a funnel to separate the sand and sugar from the oil and water mixture. Then, you can use a separation technique such as decantation or centrifugation to separate the oil from the water. Finally, you can use a process like distillation or filtration to separate the oil from the water.
spin it out! - Oil will come to the top
The process used to separate crude oil is called fractional distillation. In this process, crude oil is heated to separate it into its component parts based on their boiling points.
refinin oil means to heat the oil to separate it into chemicals
oil
Yes, it is possible to separate oil from water using a method called electrocoagulation. In this process, an electrical current is applied to the mixture, causing the oil droplets to coagulate and separate from the water. The separated oil can then be skimmed off the surface.
No, you cannot separate oil from water using a spoon. Oil and water do not mix, so they will not combine easily. To separate them, you can use a method like allowing them to settle and then manually removing the oil layer with a tool like a pipette.
Yes... oil will float on top
put oil onit
Not usually
yes