To set the time and date (must be done in this order) 1. Press MODE 3 times, then press START to change the seconds. 2. Press RESET to change the minutes, then press START until you get to the right minute. 3. Press RESET to change the hour, then press START until you get to the right hour. Note: If it says "H" on the right circle, it should read 24HOURS, otherwise it should read "A" for AM and "P" for PM. 4. Press RESET to set the date, then press START until you get to the right date 5. Press RESET to set the month, then press START until you get to the right number. 6. Press RESET to change the day of the week, then press START untilyou get to the right day. 6. Press MODE when done. Hope this helps
The procedure to set day and date on a Tommy Hilfiger watch is simple. There are buttons the side of the watch to help to set these features.
How do I set the date on a cardinal watch?
How do you set the time & date on diesel watch DZ-7069
its just for looks :)
Pull out the stem and turn to set the time. If the watch has the Date or both Day and Date, you pull the stem out half way to set those.
press all three together: mode, reset and start button to disable / enable alram
These are fake dials; they can not be set.
To set a Philip Persio watch, first pull out the crown (the small knob on the side of the watch). Turn the crown clockwise or counterclockwise to set the time and date. Push the crown back in once you have set the time and date to the desired positions.
Pull out the key and turn it
Pull the bezel out one click and rotate counter-clockwise
The pocket watch will have a 'crown' that will , usually , have two positions in which to set both the date and time . Gently pull the 'crown' up into one of the two positions and turn the crown to see which function is being affected - either the date or time . Set the watch and return the 'crown' to it's original position .
You will need to hold down the button. Then you can press up or down in order to get the date to change.