This truck adjusts its own timing with sensors.
Do this only if you have removed the distributor and turned the motor over or turned the fly wheel. Also if you rebuilt the engine. You must take the number 1 spark plug out and briefly click the key don't crank the engine do this until you hear or feel air come out on the number one spark plug. Then check the timing mark on the fly wheel (1/16" wide groove) it should line up with the fixed "v" mark on the engine block. If you don't check the timing mark the engine could be on the exhaust stroke and not the compression stroke.
If you do this wrong you could damage the exhaust or intake valves in your engine block.
how do you set the timing on a 1993 Chevy pick up
It does not have one. You can not use a timing light on that year engine. The timing is computer controled. You MUST have an engine scanner to set the timing.
How do you set the timing on a 2000 Chevy blazer (V6)
how do you set the timing on a distriubtor for a 2002 Chevy blazer
You dont! The timing is fixed and is driven off of a crank sensor on the back of the engine. All timing adjustments are computer controlled.
There is no timing to set. The timing is controlled by the ECM with signals it receives from various sensors.
It is computer controled and not adjustable, Wrong answer, it is adjustable. I have a 94 s-10 blazer, and have set the timing more than once. Timing light and wrench to loosen the distributer.
I just set my timing and the plug on my 1994 full size Chevy Blazer (same as a full size pick up) was directly under the glove compartment. It was one wire (tan with black stripe) and two ends of a plug together just unplug and set timing.
how do you set the timing belt on a 1997 ford contour 2.0 4cy
there is a timing connector, this is usually a tan wire with a black tracer..it is usually located under the carpeting close to the heater cox on the passenger side of the truck
Set timing on a 2.8 liter v6
The timing is totally controlled by the engine control module.