Pull out the key and turn it
To set the time on a Stauer titanium atomic watch, first ensure the watch is receiving a signal from an atomic clock. If not, manually set the time using the crown. Pull the crown out to the time-setting position and rotate it to adjust the time. Push the crown back in once the correct time is set.
To set the time on a Michele watch, find the crown on the side of the watch and gently pull it out to the first position. Rotate the crown until the correct time is displayed, then push the crown back in to secure the time setting. Ensure the watch is wound and running before adjusting the time.
To set the time on a Stauer watch, pull the crown out to the time-setting position. Turn the crown clockwise or counterclockwise to adjust the time to the desired hour and minute. Push the crown back in once the correct time is set.
To set the time on your TechnoMarine watch, first locate the watch crown on the side of the watch. Pull the crown out to the appropriate position (usually position 2 for time setting) and then turn the crown to adjust the hour and minute hands to the correct time. Once you have set the time, push the crown back in to secure the settings.
To set the time on a Rolex Day-Date watch, gently pull out the crown to the first position and rotate it to set the date. Pull the crown out to the second position and turn it clockwise to set the time. Finally, once you have set the time, push the crown back in to the original position to complete the process.
Very simple Just press the SET button for 4 to 5 sec and it will blink the Sec continuously Now you are in setting mode and press the MODE button to select the time and date mode one by one and use the ADJUST button to set the correct time and date. Once you are finish the job press again the SET button to complete the same Cheers
To set an alarm on the Fastrack 4050PP02 watch, press the mode button until you reach the alarm setting option. Use the adjust button to select the alarm feature, then navigate to set the desired time using the hour and minute buttons. Once you've set the time, confirm your settings to activate the alarm. Finally, ensure the alarm is turned on, usually indicated by a symbol on the display.
To set the time and month on the Titan Zoop C3001PV01 watch, first, pull the crown out to the second position. Rotate the crown to adjust the month and date, ensuring the month aligns with the correct date. Then, pull the crown to the third position to set the hour and minute, rotating it until the correct time is displayed. Push the crown back in to finalize the settings.
how do I set time on a wal mart aw watch
How do you set the time & date on diesel watch DZ-7069
digitel time set
To set the time on a Gucci wrist watch you simply pull the crown out to the middle position. You can then move the time clockwise or counter clockwise to set the correct time. Once you have the time set, push the crown back in to start the watch.
howdo you set the time on a hotaru LED watch
Several models of this watch have different combinations to change the date and time. So i would advice you to take your watch to a titan showroom or where you bought the watch. I had the same problem with my watch so i did the following steps 1. Press and hold the set switch usually on the bottom left side of the watch. 2. When the seconds starts blinking press the mode switch and go to the desired area you want to adjust. 3. To adjust the date/time press the adjust switch. 4. To return to normal time press the set switch once.
how do i set my active intent watch ?? tw2461 sr626sw/cr2016
Breitling watch info at link
depends on the watch.