Look on the inside of the watch band for two arrows appearing on the two links closest to the clasp. On the edge of those links you will see two holes where the pins are secured.
Put the sharp end of the thumb tack into the pin hole. Tap the flat plastic end of the tack with the hammer in the direction the arrows are pointing.
Remove the pin with pliers after the hammer pushes the pin out slightly. Pull the pin out straight. The pin will be ruined if it is bent.
Repeat Steps 1 through 3 to remove the second pin.
Remove one link from the band once both pins are removed. You will remove the link that is second in from the clasp.
Match up the two loose links like puzzle pieces. You need to fit them together so a pin can secure the links.
Insert a pin into the hole on the edge of the band. Use the hammer to tap the pin into place. Remember to follow the direction of the arrows. Replacing the pin reattaches the band.
To shorten a fossil watch band, you can usually remove links from the metal bracelet by using a small screwdriver or a specialized watch band tool. Look for the small pins that connect the links and use the tool to push them out in the direction of the arrow. Keep in mind that if you are uncomfortable doing it yourself, it's best to have a professional jeweler or watch technician do it for you.
A person can take a Fossil watch band for resizing to a jeweler. The watch can also be sent back to Fossil.
The watch band on this Fossil is a leather band.
I have a black fossil diamond watch with a black band that needs two extra links can i buy them or a new band thanks Michael
I took mine to the Wal-mart jewelry counter and they took out a couple of links for me.... for free.
yes of course only if its a dial case band. you have to push out those little pins on the band. then adjust to your wrist size. it is very simple
It had better to use stretchable watch bands, these are easy to weaR. Usually i buy watch bands from Sarah Wholesale. I hope you can get good watch bands.
Amazon does offer Fossil brand watch brands. They range in price so one can find the band that fits one's budget. The popular models seem to be made of leather or silicone.
Stick it in cold water.
its probably easier to take it to a watch shop and ask them whether they can fix it for a small fee or alternatively if you have a guarantee take it back where you got it from and they are obliged to fix it for free
No, the band that is on the watch cannot be replaced. If you need a new band, you will have to purchase a new watch.
Changing the date on a fossil watch is easy. All you have to do to change the date is turn the right hand knob on the watch.
If you look at the pins on the band, you'll notice one side is round, flat and smooth. The other side of the link is round and has what appears to be a pin in the center. This side should be facing up and the band should be straight. It was easier to remove the pins with the band in a straight position. I used one of the tools to the very right of the needle nose plyers (pin punch) and the watch hammer to push the pin out.