you have to take off the 2 bolts on the side of the tire to take them off
take out the five bolts located on the center of the rim and pull it off...
The balance is off if your tire is wearing unevenly
first you have to take the tire off the car along with all four of them then you take the wheels off and measure all around the car's tire
Take the wheel Cover off.
if the tire is on the rim with no air. use some soap and water to lube up the bead of the tire and send a good burst of air. if this does not work take it to a local tire center to be beaded up. should be free.
You have to use a key to take tire off
every time you take the tire off, its recommended, and always use nickel plated valve cores along with the factory aluminum valve caps. the brass cores will corrode and ruin the sensor
Try using the lug wrench. If its an older model with the wire-wheel caps, you'll need an adapter tool to unscrew the caps from the center after you've removed the center cap.
The thermostat is in the rear left tire, you need to take the trunk off and then take the tire off and take it to a shop and have them remove it.
After you take off the tire, pull off caps where the caliper bolts are. You need 7mm Allen wrench to remove. I recommend 7mm Allen socket that you can get at your automotive store. Then use socket set to take off rotor bracket, I think it's 18mm socket. Remove rotor. If it's rusted on, hit it with rubber mallet or hammer, it will come off.
Take it off of CAPS LOCK.