With a wrench...... :-)
The engine oil drain plug is found at the lowest point on the oil pan. The original drain plug would take a 15mm wrench to remove it.
The engine oil drain plug is found at the lowest point on the oil pan. The original drain plug would take a 15mm wrench to remove it.
Lefty Loosey (counterclockwise to remove), righty tighty (clockwise to tighten). That drain plug should take a 15mm wrench.
The engine oil drain plug would be at the lowest point on the bottom of the oil pan. It should take a 15mm wrench to remove it couterclockwise.
Assuming you are asking about the radiator coolant drain, it should be on the passenger side under the lower radiator hose. It should take a 1/4" square drive to open it.
The engine oil drain plug would be at the lowest point of the oil pan. It should take a 15mm wrench to remove it.
Take the drain plug out let the oil drain replace the oil filter, put drain plug back in and fill with the recommended ammount and type of oil.
I really doubt that there is a drain plug for the tranny, usually you have to unbolt the tranny fluid pan and take it down to get to the filter and drain the fluid.
The drain plug would be at the lowest point under the engine. It will take a 15mm wrench to remove it counterclockwise.
what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer
there are no drain plugs on gas tanks, you will have to siphon the gas out or take the tank down to get the gas out.
The engine oil drain plug is located at the lowest point of the engine oil pan. It should take a 15mm wrench to remove it.