To tighten the head gasket on a 2-liter 16-valve Vectra, first ensure the engine is cold and the cylinder head is clean. Use a torque wrench to tighten the head bolts in the correct sequence, typically starting from the center and working outward in a crisscross pattern. Follow the manufacturer's specifications for torque settings and ensure you perform any necessary angle tightening if required. Always double-check your work to ensure proper sealing.
Chain
About 4.5 liters.
140 + If driven by right person
you need a turbo first!!
try the small pipe from turbo and trace it to make sure connections are tight just had same problem and this pipe was worn
To tighten the fan belt on a Vauxhall Vectra, locate the alternator, which typically has an adjustable mounting bracket. Loosen the securing bolts on the alternator to allow for movement. Then, adjust the position of the alternator to increase tension on the belt before re-tightening the mounting bolts. Check the belt tension by pressing down on it; it should have a slight give but not be overly loose.
vectra b is the earlier engine
Check the fuel injection air-intake. I had a similar problem on my Alfa when there was a leak in the pipe between the air-filter and the manifold. idle control switch on throttle body try taking off the idle control valve and giving it a good clean out with some choke and carb cleaner it comes in a spray can i had this problem with my vectra apparently it is a common fault with them once i cleaned the control valve all was ok
Will a tow bar of a vectra b fit a vectra c
Opel Vectra was created in 1988.
HP Vectra was created in 1985.
whAT is the difference between the sri vectra xp and the sri vectra 16v