Hi there, there is no idle adjustment on this vehicle. The most probable cause is a leaking throttle body gasket, or a bad Idle air control. A stuck open thermostat will cause a high idle in cold climates. Good luck and let me know you find wrong.
.043
sounds like a vacuum leak
.43L. 1000ml=1L
4L60/E l
43L of 18-k gold
Yes it will bolt right up to it.
There is one before and one after the catalytic converter.
I have a '90 so I think it would be the same, on mine it is at the front of the engine on the bottom pulley. (crankshaft pulley or vibration dampener) To view the scale and mark I have to look down, a little on the drivers side of center. Beside the break resivour is a good viewpoint, looking just over the timing light. I have to run the timing pickup coil in through the drivers door or window and into the open doghouse cover. Good luck. God Bless!
The fuel lines around the filter; you will need an adapter.
There is no adjustment required, but you can clean it with a carb cleaner.
Use an exhaust made for an LT1 engine the blocks are identical it is the insides that is different. Will bolt right on.
Don't know what year you have but some sensors are temperature sensitive and you should run a 195 degree thermostat.