SD (Secure Digital) card readers go into 'write-protect' mode if there is a notch cut into the upper-left edge of the card. This is similar to the write-protect cutout on floppy disks, and audio or video tape.
Many SD cards provide reversible write-protection by means of a pre-cut notch, and a small sliding tab: Sliding the tab downwards (toward the position marked 'lock') exposesthe notch and activates write-protection. Conversely, sliding the tab upwards covers the notch, which deactivates write-protection.
But sometimes, even though set to the 'unlock' position, the sliding tab doesn't protrude enough to deactivate write-protection. In this case, placing a few layers of scotch tape over the tab can thicken it enough to allow writing to the SD card. Note: Care must be taken to ensure the gold contacts on the card aren't blocked by the tape!
Other cards that don't have a switch like this may use the default settings (configured by the device that it came with) to disable writing to the disk. Note: these other card types are probably set to be write protected by the device software that came with them (such as a digital camera and the accompanying software would figure that it is the only interface that will write to your memory card).
Virtually *all* USB devices that have onboard storage capacity will in raw form be seen by the computer as an added hard drive. You can check for this by going into My Computer or Explore (on IBM based pc's). If you can get to a file/folder view of the memory card you are asking about, try and set the (top level) folder properties and/or file properties to *not* be hidden or read-only. More information regarding file permissions can be clarified by researching file attributes.
In the case of my camera, there is an option to select and protect any images via the menu. I'm not sure all cameras do it or that the steps are the same. You can also insert the card into a card reader and write protect all images in one step. To me it makes more sense at that point, to copy those images to a PC or portable storage (preferably multiple drives - and best yet, have at least one disk or drive which can be kept at a separate location). Once the images are safely copied and protected, then clear the originals from the SD card. I carry a small battery operated drive with a built-in card reader.
[[User:71.164.143.19|71.164.143.19]]
There is usually a very small slide bar to one side of the card. You will need to slide that little bar to the other end of the opening. It is usually printed on the card which direction it needs to be in.
Its very simple...You just have to unlock the write protection mode of card reader which you are using for your SD card.
How to remove media write-protection from card reader
There are many ways to remove write protection from a micro SD card. One is to put the card in the computer and use the program that way. Another is to put the SD card into the unlocked position.
If you are plugging the micro sd card inserted through a card adapter to your PC then all you need to do is just check and unlock the lock button to remove write protection.
slide up the thing at the right of the sd card.
Looking at the SD card with the label facing you, and the 'cut off corner' to the top. There is a tiny slider on the left-hand edge of the card. Move the slider down to apply write-protection - and up to remove it.
slide the little tab on the side.
If you are using it with the SD adaptor, the swith at the side marked lock is not to secure the micro sd card within the adaptor. This is the write protection. If you set this to the 'unlocked' position (up) then you should be able to write files onto it! very good thanks
Write protecting your SD card memory does not necessary guarantee a long lifespan.
An SD card has a tiny write-protect switch on the case. If you hold the card with the cut corner to the left, the write protect switch is on the opposite side of the cut corner. Slide it towards the copper contacts to write-protect the card, and the opposite way to remove the protection.
memory password forget
Should be a small slider switch on the side of the card. Slide it uo.
SD cards are not magnetic media. It will (should) not work. H