there is lan tester available in the market, we have to connect one side of the crimped cable to one of the part of lan tester and the other side crimped cable had to be enter the other part of the lan tester... then we have to on the lan tester and we are able to visible LED's blinking one after the other , if not ther is a problem in crimping the cable..
land tester is use for check a utp cable..if is worth
Coaxial cable, STP cable, UTP cable
3
Most UTP cable is limited to 100 meters.
Actually, a UTP cable doesn`t have any shielding. UTP stands for Unshielded Twisted Pair.
Typically a straight thru UTP cable can be used.
cable tester
Cable tester
it is a point where a UTP cable connects to the device
UTP cable, BNC connector, STP cable
The maximum distance a utp cable can handle is 100 m. If you need to bridge over 200 meter and you can only utp cable, you will need to put in enough hubs or switches so that the length of utp cable is never more than 100 m. You can forego of the utp cable and make use of COAX cable. A good quality cable will transmit signals over around 300 m. distance. You can forego of the utp cable and make use of fiber optic cable. Then you can transmit signals over a 40 km distance. Wireless Microwave and WiMax would be an option to cover the distance using radio waves.
what is use cross overcable