Want this question answered?
the wheel and axle is a simple machine made from two circular objects and are different sizes that are attached and rotate together and it is a lever that can rotate to 360 degrees
Yes, there are about 16.6 million different colors in the RGB color wheel.
B
That depends on the relative sizes of the gear shafts used to transmit power from the motor to the wheel. For instance, if they were the same size, and no gears in between, then the wheel would rotate 400 times a minute (RPM), which is 6.66 times a second. But usually gears transmit power in such a way that the wheel rotates slower than the motor (less RPM) but with more power.
This is a measure of a car tyre. It is a combination of units and ratios that is enough to drive most people nuts! 175 refers to the width of the tyre (in millimetres) from sidewall to sidewall. 15 refers to the diameter of the wheel rim (in inches). 75 is the ratio (in percent) of the profile to the width. The profile is the length from the wheel rim to the edge of the tyre. I suspect the r means a radial tread but I am not sure about that.
There are different sizes for wheelie bins.
Well, if you have two bikes with the same wheel sizes, going at the same speed, but the pedals going at different rates - then they have different gear ratios. Mosty probably due to having different tooth counts at chain wheels and sprockets.
The larger the wheel size the easier it is to run over humans
Gears. Gears are circular objects of different sizes that are attached in such a way that they rotate together to transmit motion.
A wheel and axle
No, a wheel and axle consists of two different circular pieces of different sizes. The larger circular piece is the wheel in the system, and the smaller circular piece is the axle.
Can't be answered, bike wheels come in many different sizes.
wheel and axel
They came in different sizes, but the radius of the wheel had to be less than the inseam measurement of the rider.
no its a grooved wheel with a rope running along the groove the above answer is wrong because it is the definition of a pulley. Yes that is true. A wheel and axle is a simple machine consisting of two wheels of different sizes that rotate together.
There are a wide variety of truck wheels. There are wheels for small pick-up trucks, military trucks, and "big rig" trucks. There are over 7 standard truck sizes for tires. Cooper Tire lists over 20 different sizes for truck tires. Another website lists over 100 truck tire sizes. Each tire fits on a certain type of wheel. There are hundreds of different wheel types and sizes.
There are several different axle and wheel sizes that each carry different loads.