0
What else can I help you with?
Can you use 125v 2a fuse to replace a 125v 10a?
No, you cannot use a 125V 2A fuse to replace a 125V 10A fuse. The lower-rated 2A fuse will blow under normal operating conditions if the current exceeds 2 amps, while the 10A fuse is designed to handle higher current levels without blowing. Using a fuse with a lower amperage rating than required can lead to frequent outages and potential damage to the circuit or devices. Always replace a fuse with one that matches the original's specifications.
Can you plug a 125v into a 220v?
No, it is not safe to plug a device rated for 125V into a 220V outlet. This could result in damage to the device or a potential safety hazard, such as a fire or electrical shock. It is important to match the voltage requirements of the device with the voltage supplied by the outlet.
What is the resistance of a 125V outlet?
A typical 125V outlet in North America has a resistance of almost zero ohms when it is connected properly. The outlet is designed to provide a pathway for electricity to flow easily without significant resistance. The resistance can increase if there are issues with the wiring or connections.
Can you plug a 125V to 220V?
No, you cannot plug a device rated for 125V into a 220V outlet directly. Doing so may damage the device and pose a safety hazard. You would need a voltage converter or transformer to safely use the device with the higher voltage.
What gauge wire for 125V lamp socket?
For a 125V lamp socket, it is recommended to use 18 or 16 gauge wire. This wire gauge ensures proper electrical conductivity and safety for the lamp's voltage requirements. Always consult the lamp's manufacturer or a qualified electrician for specific recommendations.
Can you use 7amp 125V fuse replace 6.3amp 125V fuse?
no.. it could damage your electrical components.
What is the difference between 125V 15A fuse and 230V 15A fuse?
The voltage rating of a fuse (in this case 125V or 230V) defines the maximum circuit voltage that the fuse is safe to be used on. A fuse with a voltage rating of 125V should not be used in a circuit with a voltage greater than 125V. If a 125V fuse were installed in a 230V circuit and an overload current occurred, the fuse could explode.
How do power cords differ?
Power cords have different voltage rate, example 7A/125V cord can hold much voltage than 3A/125V. The higher the current flow can melt the lower type of power cord that is dangerous and can cause fire. Base on my knowledge there are different types of power cords according to the ampere and voltage needed.
Will 3A 125v work with 250 V?
No it will not work.
What is needed to change 74volt dc outlet to either 110vac or 12voltdc?
An inverter.
What does 110vac mean in electricity?
110VAC means that the electrical device operates with an input voltage of 110 volts of alternating current (AC). This voltage is commonly used in household electrical systems in countries like the United States.
Will 10a 125v power cord power a10a 250v?
no
Can you plug a 125v appliance into 110v car outlet?
Yes
What is diffrenence between 24vdc sov 110vac?
The main difference between a 24VDC solenoid valve and a 110VAC solenoid valve is the voltage they operate on. The 24VDC solenoid valve operates on 24 volts of direct current, whereas the 110VAC solenoid valve operates on 110 volts of alternating current. The choice between them depends on the power supply available and the specific application requirements.
Can you use a 250V 3.15A fuse to replace a 125V 3.15A?
yes. the 250v just means that's the maximum voltage rating the fuse can handle .. so it can def handle 125v. just not vice versa.
Can you use 125v 2a fuse to replace a 125v 10a?
No, you cannot use a 125V 2A fuse to replace a 125V 10A fuse. The lower-rated 2A fuse will blow under normal operating conditions if the current exceeds 2 amps, while the 10A fuse is designed to handle higher current levels without blowing. Using a fuse with a lower amperage rating than required can lead to frequent outages and potential damage to the circuit or devices. Always replace a fuse with one that matches the original's specifications.
Can you power American equipment from a 220 -125v step-down transformer or must it be 110v?
No
