0
The water inside the balloon will absorb some of the heat from the fire, which may cause the balloon to expand as the water heats up. Eventually, the balloon may burst when the pressure inside exceeds its capacity. It's important to exercise caution when conducting experiments involving fire and water-filled balloons to avoid injury.
What else can I help you with?
Why wont balloons pop when over fire when there is water in it?
Inside the balloon with no water at all, the intense heat from the hot fire will melt the surface of the balloon. The pressure inside the balloon is so big that the balloon deflate and POP! With water, the water conducts the fire away from the balloon so the suface may not reach high tempertures. The balloon is remained inflated.
Why doesnt a water balloon pop when it is over fire?
It's because the water inside the balloon absorbs the heat of the fire. If you hold it there long enough the water inside will boil and then it will pop, because the fire will start getting attracted to the heat, so then all the water will get enough of holding on, and then it will pop(the balloon).Water is a very great substance for soaking up any kind of heat. The thin balloon allows the warm heat to pass through very quickly and warm the cold water. As the water closes up to the flame as it heats up, it begins to rise and cooler water replaces it at the bottom of the balloon. This cooler water then soaks up more heat and the process repeats itself. In fact, the exchange of water happens so often that it keeps the balloon from ever popping!The soot on the bottom of the balloon is actually carbon. The carbon was deposited on the balloon by the flame, and the balloon remains undamaged. I even tried this for a science fair, and it was pretty cool. I found it on the internet and stuff, it was plain cool. Like the judges were SO excited, and they were watching and watching and the balloon didn't pop. Then, finally, when I felt the balloon and it started getting warmer, I explained why it was getting warm, and the judges loved how I presented. You should try it for a science fair, who knows, you might win!
Give an example of where you can see a chemical reaction take place when a hot air balloon flies?
When the hot air balloon flies, the chemical reaction that occurs is the burning of propane gas in the burner at the base of the balloon. Propane gas is mixed with oxygen from the air, resulting in combustion and the release of heat energy. This heat causes the air inside the balloon to expand and become lighter, enabling the balloon to rise.
What element reacts badly with water?
Some metals in the table do not react with water
Does silver react with fire?
Silver does not react with fire at normal temperatures. However, when exposed to very high temperatures, silver can melt and oxidize, forming silver oxide.
Why wont balloons pop when over fire when there is water in it?
Inside the balloon with no water at all, the intense heat from the hot fire will melt the surface of the balloon. The pressure inside the balloon is so big that the balloon deflate and POP! With water, the water conducts the fire away from the balloon so the suface may not reach high tempertures. The balloon is remained inflated.
Why does balloon filled with water do not blast when it is shown to fire?
Why does the balloon with no water break in the flame? And balloon with water not break? The flame heats the rubber of both balloons. The rubber of the balloon without water becomes so hot, that it becomes too weak to resist the pressure of the air inside the balloon. When water inside the balloon is placed in the flame, the water absorbs most of the heat from the flame. Then, the rubber of the balloon does not become very hot. Because the rubber does not become hot, it does not weaken, and the balloon does not break. Water is a good absorber of heat
What is the result if I put a water balloon over fire?
Putting a water balloon over fire would cause the balloon to burst due to the intense heat. The water inside the balloon would quickly turn to steam, increasing the pressure until the balloon can no longer contain it. This could lead to a small explosion.
What is the fire inside a hot air balloon called?
The fire inside a hot air balloon is typically fueled by propane and is called a burner. The burner heats the air inside the balloon envelope, causing it to become less dense than the surrounding air and lift the balloon off the ground.
Why doesnt a water balloon pop when it is over fire?
It's because the water inside the balloon absorbs the heat of the fire. If you hold it there long enough the water inside will boil and then it will pop, because the fire will start getting attracted to the heat, so then all the water will get enough of holding on, and then it will pop(the balloon).Water is a very great substance for soaking up any kind of heat. The thin balloon allows the warm heat to pass through very quickly and warm the cold water. As the water closes up to the flame as it heats up, it begins to rise and cooler water replaces it at the bottom of the balloon. This cooler water then soaks up more heat and the process repeats itself. In fact, the exchange of water happens so often that it keeps the balloon from ever popping!The soot on the bottom of the balloon is actually carbon. The carbon was deposited on the balloon by the flame, and the balloon remains undamaged. I even tried this for a science fair, and it was pretty cool. I found it on the internet and stuff, it was plain cool. Like the judges were SO excited, and they were watching and watching and the balloon didn't pop. Then, finally, when I felt the balloon and it started getting warmer, I explained why it was getting warm, and the judges loved how I presented. You should try it for a science fair, who knows, you might win!
Why does hot air balloon need fire so that it can fly?
A hot air balloon needs fire to heat the air inside the balloon. Heating the air makes it less dense than the surrounding air, causing the balloon to become buoyant and rise. The fire is used to maintain the temperature of the air inside the balloon to keep it flying.
What happens when you put balloon on top of a fire?
If a balloon is placed on top of a fire, the heat will cause the air inside the balloon to expand rapidly, potentially causing the balloon to burst or pop. The rubber material of the balloon is not flame-resistant and could catch fire. It is not safe to place a balloon on top of a fire.
What is used to power a hot air balloon?
There is the fire that changes the density of the inside of the balloon causing it to rise.
How does the balloon get heated up?
A balloon gets heated up by the sun or another external heat source that warms the air inside the balloon. The heated air inside the balloon becomes less dense than the surrounding air, causing the balloon to rise.
What elements react with meitnerium?
Water AND FIRE
How does a hot air balloon stay up?
A hot air balloon stays up because hot air is less dense than cold air. When the air inside the balloon is heated by the burner, it becomes lighter and causes the balloon to float upwards. By controlling the temperature inside the balloon, the pilot can control the altitude.
Why a balloon burst when blowing air in it?
This is because the water is cooling it. As soon as the water is hot enough to form bubbles, the ballon will start melting where bubbles are formed, and ballon will soon "explode" or rather "implode".
