Want this question answered?
Checking the pressure of a fridge compressor is easy. Remove the compressor and give it a shake. After taking the compressor off it should make a sound while shaking that means itÕs still good if the compressor makes no sound that means it has went bad.
About 10-14kg
If the compressor doesn't start remove all the relays and circuitry installed on it and measure the resistance of the windings A video detailing the process can be found in related links.
there are coils in the back of the fridge with a fan blowing on it when the compressor gets to hot it takes a break and then the fan cools it down mostly stays off for a few hours..
How work cooling & relay & condancer work
The compressor is needed for the cooling of the air. This works the same way the compressor of a fridge or a freezer work. It uses the physical principle of a heat pump.
yes but if the compressor does not work there is no reason for it.
Checking the pressure of a fridge compressor is easy. Remove the compressor and give it a shake. After taking the compressor off it should make a sound while shaking that means itÕs still good if the compressor makes no sound that means it has went bad.
About 10-14kg
a compressor cant lift..
Apparently you need to use compressor oil, such as Fridge compressors (Commercial) im told Apparently you need to use compressor oil, such as Fridge compressors (Commercial) im told Apparently you need to use compressor oil, such as Fridge compressors (Commercial) im told
compressor rate
Can't do it. The lubricant is mixed in with the refrigerant. Converted to air it would be running dry.
Yes, however for compressor life, the compressor should be rotated so as to preserve the gravitational oiling characteristics.
What are you trying to do? Sounds dangerous, I don't advise doing this.
If the compressor doesn't start remove all the relays and circuitry installed on it and measure the resistance of the windings A video detailing the process can be found in related links.
Most of the time, there is no way to route the belt without all the pulleys in place. As long as the bearing in the clutch on the AC turns it is alright, the compressor itself does not need to work.