0
how electricity is produced in a nuclear reactor
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Why are most nuclear reactors near water?
Nuclear plants use water as both working fluid and coolant. The reactor itself is cooled by cold water (rarely salt or gas), and functions as a heater, creating steam, which works turbines, which, in turn, generate electricity.
How are nuclear reactions controlled in power plants?
A nuclear reactor is a device in which nuclear chain reactions are initiated, controlled, and sustained at a steady rate. The heated water rises up and passes through another part of the reactor, the heat exchanger. The moderator/coolant water is radioactive, so it can not leave the inner reactor containment. Its heat must be transferred to non-radioactive water, which can then be sent out of the reactor shielding. This is done through the heat exchanger, which works by moving the radioactive water through a series of pipes that are wrapped around other pipes. The metallic pipes conduct the heat from the moderator to the normal water. Then, the normal water (now in steam form and intensely hot) moves to the turbine, where electricity is produced.
What are two types of reactors used in the US?
There are amny different types of reactors but the most commonly used ones are: PWR-Pressurized Water Reactor, this works by pressurizing the reactor allowing the water to boil at a much higher temperature allowing efficentcy to be higher. BWR-Boiling Water Reactor,this is the most basic type of reactor this reactor just boils water that turns turbines and produces electricity, however water levels and temperature have to be constantly monitored, otherwise a reactor could slip into a dangerous state. AGR-Advanced Gas Reactor, this reactor instead of being cooled by water it is instead cooled by pressurized carbon dioxide. FBR-Fast Breeder Reactor, this reactor instead of limiting fast neutrons to occur it allows fast neutrons in the reactor and in the act of doing it produces nuclear fuel that can be used to fuel the reactor.
The process of nuclear power plant in bataan how it works?
I don't know details of this plant, but if it is a PWR you will find questions and answers in this section of WA which explain this type of reactor, and you can also look at Wikipedia entries.
What type of energy works by removing electrons from atoms to produce electricity?
The type of energy that works by removing electrons from atoms to produce electricity is called electrical energy. This is typically achieved through processes like chemical reactions in batteries or the movement of electrons through conductive materials in electrical circuits.
Do you currently use combustion to produce nuclear energy in nuclear reactors?
No. The heat from the reactor is used to boil water. The steam from said water is used to turn turbines which produces electricity. No, there is no combustion in a nuclear reactor. Nuclear energy does not need combustion to start it, there is no chemical process involved. It works simply by a neutron chain reaction.
What does a nuclear reactor do in a nuclear power plant?
You rip apart an atom which releases great energy in the form of heat. The energy causes water to evaporate which turns a turbine. The turning turbine creates electricity. This is how a nuclear reactor works.
How do coolant systems work in nuclear reactors?
Coolant Systems on a Nuclear Reactor works by pumping large amounts of Sea Water into the reactors to cool it down and produce steam.
Why are most nuclear reactors near water?
Nuclear plants use water as both working fluid and coolant. The reactor itself is cooled by cold water (rarely salt or gas), and functions as a heater, creating steam, which works turbines, which, in turn, generate electricity.
What is used for nuclear feuls?
Uranium or Plutonium For reactor fuel any Transuranic element works fine.
What does a nuclear reactor use to make heat?
The way a reactor works is rods of a radioactive material(say, uranium),are put into a bath of water, the heat from the radioactivity causes the water to vaporize. The steam then runes through wheels, the steam pushes the wheels and the wheels turning is used to generate electricity. But the heat is caused by radiation.
Which type of energy works by removing electrons from atoms to produce electricity?
solar
Which type of energy works removing electrons from atoms to produce electricity?
solar
How are nuclear reactions controlled in power plants?
A nuclear reactor is a device in which nuclear chain reactions are initiated, controlled, and sustained at a steady rate. The heated water rises up and passes through another part of the reactor, the heat exchanger. The moderator/coolant water is radioactive, so it can not leave the inner reactor containment. Its heat must be transferred to non-radioactive water, which can then be sent out of the reactor shielding. This is done through the heat exchanger, which works by moving the radioactive water through a series of pipes that are wrapped around other pipes. The metallic pipes conduct the heat from the moderator to the normal water. Then, the normal water (now in steam form and intensely hot) moves to the turbine, where electricity is produced.
Why is Ibrahim gay?
Wow i meber new he owned a cum reactor thats weiard
Who works with plutonium and why?
Chemists, engineers, electronic specialists, physicists: to make nuclear fuels, nuclear weapons, radioisotopic source of heat or electricity etc.
What type of reaction is used to generate electricity in a nuclear power plant?
Nuclear fission, the splitting apart of the atom, is used to generate electricity in a nuclear power plant. Nuclear fusion, the joining together of two atoms to create electricity, has been tried, but, it only works for a few seconds at best, and it will not be a source of power until sometime in the distant future.
