0
All venture models have this problem. The silicone seal around the lens has failed. Simply remove the light assemble and re-silicone around the seam where lens meets the backing. Ideally you want to remove lens and old silicone and reseal. That can be tricky. You dont want to crack the lens while removing. Hint = use a hair dryer to heat up silicone seam first. Good luck
What else can I help you with?
How do you install a water pump on a 1998 Chevy Venture van?
how hard is it to replace a water pump on a 1998 chevy venture van?
Show you a diagram of a water pump for Chevy venture van 2003?
please show me a diagram of a water pump on the engine of a Chevy venture 2003
How do you repair water leak into headlight assembly in Volvo S80?
this web site is awsome
How do you get water out of headlight 2007 GMC Yukon?
To remove water from the headlight of a 2007 GMC Yukon, first, remove the headlight assembly by disconnecting the electrical connector and unscrewing any fasteners. Once the assembly is out, you can drain the water by tilting it or using a vacuum. To prevent future moisture buildup, check for any cracks or damaged seals and replace them if necessary. Finally, reassemble the headlight and ensure it's properly sealed.
What causes a 2000 Chevy Venture to skip while driving?
A 2000 Chevy Venture might skip while driving because of water in the fuel or damaged or dirty fuel injectors. You might also have an issue with the distributor.
What would put water in your oil in your 2001 Chevy venture van 3.4L?
broken engine gasket.
What causes water in 2003 Chevy Venture headlight assembly Water does not leak out bottom of assembly. lens forms condensation on front of lens?
Mine too! Seems to be a common problem. There are usually small cracks at the top close to the seams that let water trickle in, but not out. If your lenses are cloudy, you can either purchase a refinishing polishing system from 3M or Meguire's. You can find new replacement housings reasonable on EBay or you can drill a 1/16 hole in the bottom inside corner to let the water drain. I've had them fill up enough that it blew out the bulb. Not fun digging out tiny fragments of glass out of housings............good luck
A fix for water getting into headlight assembly 2000 Lincoln LS?
drill a small hole in the back or bottom of the head light assembly to allow the moisture to escape.
The headlights on your 1998 Explorer are very cloudy and the lights are dim Can someone suggest a replacement headlight assembly either OEM or aftermarket that are maybe brighter than the orig candles?
Cloudy reflectors are the result of water in the headlight assembly. Many auto body parts retailers will be able to sell you an aftermarket headlight assembly that isn't cloudy. Beyond that, the highway department has specifications regarding how bright your headlights can be. A good, commercially available halogen headlight is about the limit.
What is the coolant capacity of a 2003 Chevy Venture?
The 2003 Chevrolet Venture coolant capacity is four gallons. The coolant can be mixed 50 percent anti-freeze and 50 percent water.
How many hours does it take to change a 2003 Chevy venture water pump?
1 hr and 15 mins aporx
What can you use to clean the headlight assembly on a 2004 Ford Escape?
To clean the headlight assembly on a 2004 Ford Escape, you can use a mixture of baking soda and water to create a paste, or a commercial headlight restoration kit. Apply the paste or kit solution to the headlight using a microfiber cloth, and gently scrub in a circular motion to remove oxidation and grime. Rinse with water and dry thoroughly to restore clarity. For added protection, consider applying a UV sealant afterward.
