0
What else can I help you with?
Why are waste gasses from coal-fired power stations passed through calcium carbonate?
Waste gases from coal-fired power stations are passed through calcium carbonate to remove sulfur dioxide from the gas stream through a process known as flue gas desulfurization. In this process, the calcium carbonate reacts with the sulfur dioxide to form calcium sulfate, a solid compound that can be easily removed, reducing air pollution and environmental impacts.
Why is wet powdered calcium carbonate sprayed through the waste gasses in a chimney of a coal fired power station?
Wet powdered calcium carbonate is sprayed through waste gases in a chimney of a coal-fired power station to remove sulfur dioxide (SO2) from the emissions. The calcium carbonate reacts with the sulfur dioxide to form calcium sulfate, which can be disposed of safely. This process helps reduce air pollution and adheres to environmental regulations.
Which substance is used to neutralize sulfur dioxide in fue gases from power stations?
Limestone (calcium carbonate) is commonly used to neutralize sulfur dioxide in flue gases from power stations through a process called flue gas desulfurization (FGD). When sulfur dioxide reacts with limestone, it forms calcium sulfite, which can then be further oxidized to form gypsum (calcium sulfate), a less harmful solid waste product.
What power stations produce CO2?
Most power stations that burn fossil fuels such as coal, oil, and natural gas produce CO2 as a byproduct of combustion. These fossil fuel power stations are major contributors to CO2 emissions and climate change.
How do you reduce sulfur dioxide in coal fired power stations?
Using a method called flue gas desulphurisation which involves the addition of a calcium oxide. The calcium oxide basically absorbs the sulphur dioxide on its way out of the flues; economically, useful products are produced such as gypsum which can be used as plaster.
How and why calcium carbonate is used to remove the acidic gases produced from coal- fired power stations?
Calcium carbonate easily react with acids and a neutralizing reaction occur.
Why are waste gasses from coal-fired power stations passed through calcium carbonate?
Waste gases from coal-fired power stations are passed through calcium carbonate to remove sulfur dioxide from the gas stream through a process known as flue gas desulfurization. In this process, the calcium carbonate reacts with the sulfur dioxide to form calcium sulfate, a solid compound that can be easily removed, reducing air pollution and environmental impacts.
How is Calcium carbonate used to neutralise acid emissions from power stations?
Calcium carbonate is used in power stations to neutralize acid emissions by reacting with sulfur dioxide and nitrogen oxides in the flue gas. The reaction forms calcium sulfate, calcium nitrate, and water, which are less harmful and can be safely disposed of. This process helps reduce the environmental impact of acid rain caused by these acidic emissions.
Why is it preferable for power stations to use soft water?
it is preferable for power stations to use soft water in their boilers because there is calcium carbonate in it and it does not create scale or scum
How does calcium carbonate reduce harmful emissions from coal-fired power stations?
Coal contains sulphur and when this is burnt(heated) sulphur dioxide is produced, this is a greenhouse gas. To remove this greenhouse gas, this gas is passed a mechanism like a shower that is able to dissolve it and make it an acid. Then this acid sulphur is neutralized with calcium carbonate to form calcium sulphate, water and carbon dioxided
Why is wet powdered calcium carbonate sprayed through the waste gasses in a chimney of a coal fired power station?
Wet powdered calcium carbonate is sprayed through waste gases in a chimney of a coal-fired power station to remove sulfur dioxide (SO2) from the emissions. The calcium carbonate reacts with the sulfur dioxide to form calcium sulfate, which can be disposed of safely. This process helps reduce air pollution and adheres to environmental regulations.
Calcium carbonates be used to remove acidic gases from power stations?
Yes, calcium carbonate can be used to remove acidic gases like sulfur dioxide and nitrogen oxides from power station emissions through a process called flue gas desulfurization. This involves the reaction of calcium carbonate with the acidic gases to form less harmful products like calcium sulfate and water.
What kind of steam engines are used in power stations?
Coal fired steam driven power stations are still in use
Which substance is used to neutralize sulfur dioxide in fue gases from power stations?
Limestone (calcium carbonate) is commonly used to neutralize sulfur dioxide in flue gases from power stations through a process called flue gas desulfurization (FGD). When sulfur dioxide reacts with limestone, it forms calcium sulfite, which can then be further oxidized to form gypsum (calcium sulfate), a less harmful solid waste product.
Why is South Africa investing on gas-fired power stations?
South Africa is investing on gas-fired power stations because gas is a cheaper natural resource, it is efficient and does not produce a lot of pollution when it is burnt to generate electricity.
Which pollutants can be removed from the chimney gases of factories and power stations by treatment with calcium carbonate?
Calcium carbonate can help remove sulfur dioxide and acidic gases like nitric oxide from chimney gases by neutralizing them to form less harmful substances like calcium sulfate and calcium nitrate. This process is known as flue gas desulfurization and can help reduce air pollution emissions from industrial sources.
What power stations produce CO2?
Most power stations that burn fossil fuels such as coal, oil, and natural gas produce CO2 as a byproduct of combustion. These fossil fuel power stations are major contributors to CO2 emissions and climate change.
