This mainly depends on your motorsize, characteristics,applications,according to the sitedesign, there are die casting aluminum, cast aluminum, cast iron andgray cast iron andductile ironcasting
Materials, aluminum, cast iron( gray iron and ductile iron are very common),steel plate and so on can do stand.
Pressingstator, a thermalsleeve having cold after being tightened screws fixed, weldingand so on, but also all kinds of method to have.
The base is generally divided into: box, shell and the core shell casting
In 1, a boxwith steel plate welding, short cycle,low cost, no standard, no need.
2 casting shell are generally used for small motor.The majority to iron.
Aluminum motor shell in general use thermal cover,glue, screws, iron general directly press,screw fastening
That condition is called a "ground fault". That's when the insulation of the motor winding has a break somewhere, allowing current to leak to the motor housing. The motor SHOULD be grounded, protecting the user from electrical shock, but many older motors were not grounded, providing the potential for just this type of condition. Newer motors are often "double insulated", meaning that not only is the motor winding insulated, the motor housing is also insulated. Often the housing of a double insulated motor is made of a type of plastic.
radio
IC recessed fixtures can be covered with insulation. Since insulation can be in direct contact with the fixture housing they reduce energy loss. The old type fixtures had to have a box of non combustable material built over the fixture for fire-proofing. Recessed fixtures have come a long way.
circuit breaker, or "resettable fuse", which is a reallya small circuit breaker in the housing of a fuse
they are made of alluminium
the motor which runs in electric
It is made by fractional distillation of liquid air.
It is produced by fractional distillation of liquid air.
delaware housing is made of bubble gum
2 qts = 8 cups; 3/8 = fractional part left
why does temprature fall down toward the end of the fractional column
It is made as a by-product in the fractional distillation of air to produce oxygen and nitrogen.
They were made out mud and sticks. Rich people had housing made out of wood.
Fractional distillation is a process used to separate crude oil into different components based on their boiling points. The crude oil is heated in a fractional distillation column, and as the temperature increases, the different hydrocarbons vaporize and condense at different heights in the column. The condensed fractions are collected at different levels and can be further refined into products such as gasoline, diesel, and other fuels.
somehow
Here are the main differences between an electric motor and an electric generator: Functionality: Electric motors convert electrical energy into mechanical or kinetic energy, whereas electric generators convert mechanical energy into electrical energy. Usage: Electric motors are used in fans, mixers, washing machines, and other household appliances, whereas electric generators are used as power backup during outages, in construction sites, mining areas, and agriculture. Fleming’s Rule: Electric motors follow Fleming’s left-hand rule, whereas electric generators follow Fleming’s right-hand rule. Principle: The working principle of a motor is based on the current-carrying conductor, whereas the working principle of a generator is based on electromagnetic induction. Current: In motors, the current has to be supplied to armature windings, whereas in generators, armature windings produce current. EMF: Electric motors give out back EMF, whereas electric generators produce induced EMF.
All rational numbers are fractional but all fractional numbers are not rational. For example, pi/2 is fractional but not rational.